| Pacific Barbarian |
12-28-2012 09:05 PM |
I take it you are bottoming it out, common problem. Fact is, the stock rear shock is insufficient. But what you could do is increase the preload (spring tension) as tight as possible. Then you can also increase the high speed and low speed compression by adjusting the screws in a clockwise direction to increase the damping effect. You will have to play around with it until it is better. The adjusters are click style. Whatever you do, do not screw them all the way in and leave it there. You must back them out, or else you will end up causing damage. But to be honest, the rear shock is not up to scratch.
|