Hi guys im looking for an aftermarket sproket and maybe brake hub. The stock ones are pretty beat but I don't want aluminum if i can help it any input?
check ebay, theirs lots of aluminuim after market sprockets but with some looking you can find steel ones, i just got a new 36 tooth steel sprocket for my raptor. also KB motorsports is awesome
__________________
BCM Racing#13
Raptor 700 currently running Holeshot mx 18 inch tires on rear, lonestar axcaliber racing axle, stream line rear brake rotor, HMF slip on competition pipe, UNI 4 inch air filter um high flow air box. PIM 2 Yoshi fuel control, 11:1 CP piston, 15 tooth front sprocket, 36 tooth rear sprocket, flex handle bars, pro armor fat peg nerf bars, and belly skid plate. TM design chain guide, T-9 Baja wheels, Houser sliecast A-Arms, motowoz long travel race shocks. ngk iridium spark plug
He's looking for a Steel sprocket HUB, I'm guessing the splines on he are wore out. I only know of a few replacement hubs but most a made of billet to lighten it up. I woul;d just find some good used stock ones as the aftermarket ones are usually very hard to find and expensive.
He's looking for a Steel sprocket HUB, I'm guessing the splines on he are wore out. I only know of a few replacement hubs but most a made of billet to lighten it up. I woul;d just find some good used stock ones as the aftermarket ones are usually very hard to find and expensive.
Steel sproket hub?
Linear Mode
