Overheating Help please! - Yamaha Raptor Forum
 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 06-19-2016, 01:58 PM Thread Starter
Junior Member
 
Join Date: Jun 2016
Posts: 4
Overheating Help please!

Hi, my sons mostly Stock Raptor 125 has started overheating, any ideas on potential causes would be helpful. 30 minutes in on XC course, only about 75 degrees outside....
  1. Procom CDI set on "2"
  2. UNI Filter
  3. GYTR FMF exhaust
  4. NGK iridium Plug
  5. Stock Airbox
  6. no jet change
  7. Stock unmodified head
  8. Stock Bore and stroke
Last week we burned up rod bearing (massive overheat followed), rebuilt bottom end. and this week overheat and stalled, motor still runs fine, is it possible that carb tuning is that far off? or the Procom could be causing? Please help, people with experience...
Bryce Gregory is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 06-19-2016, 04:19 PM
I may be getting older, but I refuse to grow up!

 
Join Date: Jun 2012
Location: PACIFIC N.W.
Posts: 10,226
Garage
I don't know about 125's, but I do know that with a UNI filter and FMF exhaust, the jetting needs to be checked. Maybe a cooler plug.

'19 Can-Am X3, RS Turbo, 172 HP, 1300x15 STU #2 paddle, Tribute front, DynaTec controller, cat delete, GTP blow off valve, custom flame wrap, Bent Metal windshield, Blazer wiper, rear window, 48in LED light bar, 14in LED light bar, GTP LED side lights, S3 shock tower brace, aluminum rear pull plate, 5K Badlands winch, dual batteries, 5ft lighted whips, Rugged radio and intercom, interior lights, rock lights, chase lights, over $200 additional switches, YES, street legal with dirt tires.
DEZPERADO is offline  
post #3 of 4 (permalink) Old 06-19-2016, 07:53 PM Thread Starter
Junior Member
 
Join Date: Jun 2016
Posts: 4
Thanks for the feedback... FMF did not reccomend Jet Change without removing airbox lid...., but maybe
Bryce Gregory is offline  
 
post #4 of 4 (permalink) Old 06-19-2016, 08:29 PM Thread Starter
Junior Member
 
Join Date: Jun 2016
Posts: 4
here is a picture of the plug, this like its rich over lean... any ideas?
Attached Thumbnails
Click image for larger version

Name:	overheat plug - 1.jpg
Views:	95
Size:	46.1 KB
ID:	112786  
Bryce Gregory is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in













Similar Threads
Thread Thread Starter Forum Replies Last Post
NEED HELP!! Raptor overheating issues....PLEASE HEL!P lgashi Raptor 350 Discussion 29 09-05-2012 09:14 PM
Please help, KFX 700 Overheating ruffnready Other Toys 9 04-05-2011 10:41 PM
700 overheating and not starting...need help ll2009 Raptor 700 Discussion 1 04-08-2009 09:27 AM
overheating issues, im stumpped please help stang65pony Raptor 660 Modifications 8 03-07-2009 07:16 PM
overheating, help please popcorn1983 Raptor 660 Maintenance 40 03-06-2009 07:33 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome