Here's my 07 Raptor with an 06 R1 motor - Yamaha Raptor Forum
 
LinkBack Thread Tools Display Modes
post #1 of 10 (permalink) Old 10-19-2014, 03:36 PM Thread Starter
Senior Member
 
mustangracer42's Avatar
 
Join Date: Apr 2008
Location: Clovis, NM
Posts: 626
Here's my 07 Raptor with an 06 R1 motor

Took me a few weeks to build it (nights and weekends), then tore it down for powdecoat. It was a blast at the dunes this weekend. Unfortunately, the custom coil over marvin Shaw shock didnt make it before I left for the trip, so I had a strut in it. It limited what I could do with the quad but it was scary fast. With my Duro scorchers bolted on and a the speedo corrected for them, it hits 104 mph at the top of 4th gear with 5th and 6th to go.
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	273
Size:	120.0 KB
ID:	89498  

-07 700 SE 84hp and 62ftlb tq
Motor-- +5 Hotrod & TRF Big Valve 105.5 piston 14:1 = 777cc, Slingshot and Tusk clutch,
Bo's Megalodon port and Webb 4, WK 54mm TB
DMC Force 4s, PC III and Programmable Dynatek Ignition w/DL curves
Chassis-- Wicked +2 A-arms, YFZ front shocks,+3 stock swinger, Entire frame, suspension and all engine covers PC'd flat black and Invision Artworks Graphics, Dr D reverse, +1 stock bars, ASV shorties, Blingstar Victory bumper and grab bar, Tusk Nerfs
mustangracer42 is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 10-19-2014, 03:37 PM Thread Starter
Senior Member
 
mustangracer42's Avatar
 
Join Date: Apr 2008
Location: Clovis, NM
Posts: 626
Another pic
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	388
Size:	129.1 KB
ID:	89506  

-07 700 SE 84hp and 62ftlb tq
Motor-- +5 Hotrod & TRF Big Valve 105.5 piston 14:1 = 777cc, Slingshot and Tusk clutch,
Bo's Megalodon port and Webb 4, WK 54mm TB
DMC Force 4s, PC III and Programmable Dynatek Ignition w/DL curves
Chassis-- Wicked +2 A-arms, YFZ front shocks,+3 stock swinger, Entire frame, suspension and all engine covers PC'd flat black and Invision Artworks Graphics, Dr D reverse, +1 stock bars, ASV shorties, Blingstar Victory bumper and grab bar, Tusk Nerfs
mustangracer42 is offline  
post #3 of 10 (permalink) Old 10-19-2014, 03:38 PM Thread Starter
Senior Member
 
mustangracer42's Avatar
 
Join Date: Apr 2008
Location: Clovis, NM
Posts: 626
M

More pics
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	195
Size:	132.6 KB
ID:	89522  

-07 700 SE 84hp and 62ftlb tq
Motor-- +5 Hotrod & TRF Big Valve 105.5 piston 14:1 = 777cc, Slingshot and Tusk clutch,
Bo's Megalodon port and Webb 4, WK 54mm TB
DMC Force 4s, PC III and Programmable Dynatek Ignition w/DL curves
Chassis-- Wicked +2 A-arms, YFZ front shocks,+3 stock swinger, Entire frame, suspension and all engine covers PC'd flat black and Invision Artworks Graphics, Dr D reverse, +1 stock bars, ASV shorties, Blingstar Victory bumper and grab bar, Tusk Nerfs
mustangracer42 is offline  
 
post #4 of 10 (permalink) Old 10-19-2014, 03:39 PM Thread Starter
Senior Member
 
mustangracer42's Avatar
 
Join Date: Apr 2008
Location: Clovis, NM
Posts: 626
More pictures
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	227
Size:	141.5 KB
ID:	89530  

-07 700 SE 84hp and 62ftlb tq
Motor-- +5 Hotrod & TRF Big Valve 105.5 piston 14:1 = 777cc, Slingshot and Tusk clutch,
Bo's Megalodon port and Webb 4, WK 54mm TB
DMC Force 4s, PC III and Programmable Dynatek Ignition w/DL curves
Chassis-- Wicked +2 A-arms, YFZ front shocks,+3 stock swinger, Entire frame, suspension and all engine covers PC'd flat black and Invision Artworks Graphics, Dr D reverse, +1 stock bars, ASV shorties, Blingstar Victory bumper and grab bar, Tusk Nerfs
mustangracer42 is offline  
post #5 of 10 (permalink) Old 10-19-2014, 03:40 PM Thread Starter
Senior Member
 
mustangracer42's Avatar
 
Join Date: Apr 2008
Location: Clovis, NM
Posts: 626
One more pic
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	213
Size:	134.0 KB
ID:	89538  

-07 700 SE 84hp and 62ftlb tq
Motor-- +5 Hotrod & TRF Big Valve 105.5 piston 14:1 = 777cc, Slingshot and Tusk clutch,
Bo's Megalodon port and Webb 4, WK 54mm TB
DMC Force 4s, PC III and Programmable Dynatek Ignition w/DL curves
Chassis-- Wicked +2 A-arms, YFZ front shocks,+3 stock swinger, Entire frame, suspension and all engine covers PC'd flat black and Invision Artworks Graphics, Dr D reverse, +1 stock bars, ASV shorties, Blingstar Victory bumper and grab bar, Tusk Nerfs
mustangracer42 is offline  
post #6 of 10 (permalink) Old 10-19-2014, 03:41 PM Thread Starter
Senior Member
 
mustangracer42's Avatar
 
Join Date: Apr 2008
Location: Clovis, NM
Posts: 626
I mounted the electronics, power commander and battery in a tray under the seat
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	196
Size:	140.0 KB
ID:	89546  

-07 700 SE 84hp and 62ftlb tq
Motor-- +5 Hotrod & TRF Big Valve 105.5 piston 14:1 = 777cc, Slingshot and Tusk clutch,
Bo's Megalodon port and Webb 4, WK 54mm TB
DMC Force 4s, PC III and Programmable Dynatek Ignition w/DL curves
Chassis-- Wicked +2 A-arms, YFZ front shocks,+3 stock swinger, Entire frame, suspension and all engine covers PC'd flat black and Invision Artworks Graphics, Dr D reverse, +1 stock bars, ASV shorties, Blingstar Victory bumper and grab bar, Tusk Nerfs
mustangracer42 is offline  
post #7 of 10 (permalink) Old 10-19-2014, 03:42 PM Thread Starter
Senior Member
 
mustangracer42's Avatar
 
Join Date: Apr 2008
Location: Clovis, NM
Posts: 626
Another picture added
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	154
Size:	129.1 KB
ID:	89554  

-07 700 SE 84hp and 62ftlb tq
Motor-- +5 Hotrod & TRF Big Valve 105.5 piston 14:1 = 777cc, Slingshot and Tusk clutch,
Bo's Megalodon port and Webb 4, WK 54mm TB
DMC Force 4s, PC III and Programmable Dynatek Ignition w/DL curves
Chassis-- Wicked +2 A-arms, YFZ front shocks,+3 stock swinger, Entire frame, suspension and all engine covers PC'd flat black and Invision Artworks Graphics, Dr D reverse, +1 stock bars, ASV shorties, Blingstar Victory bumper and grab bar, Tusk Nerfs
mustangracer42 is offline  
post #8 of 10 (permalink) Old 10-19-2014, 05:43 PM
Junior Member
 
Join Date: Oct 2014
Posts: 4
Nice
Novoselskiy is offline  
post #9 of 10 (permalink) Old 11-06-2014, 09:23 AM
Senior Member
 
tacky1's Avatar
 
Join Date: Apr 2009
Location: Bay Area, CA.
Posts: 481
Very nice job, Like how you left the bottom rails removable, Makes it easier to drop the motor...

2007 GYTR..CP TQS 11.5-1 Piston: Bo White +2 head: HDD5050 Cam: 54mm TB: Sparks exhaust:PCV with AutoTune: Hiper Tech 3 rims with Razr II: Motowoz LT shocks: Houser +2.25 Sli-Cast A-Arms: CCP Steering Damper: Elka Elite Rear shock: Pingle Quickshifter: Carbon Fiber Warning Labels: FourWerx Carbon Fiber Hood & Top: ASV levers: ODI Grips: ASR Brake Lines..Etc
tacky1 is offline  
post #10 of 10 (permalink) Old 11-06-2014, 03:52 PM Thread Starter
Senior Member
 
mustangracer42's Avatar
 
Join Date: Apr 2008
Location: Clovis, NM
Posts: 626
Quote:
Originally Posted by tacky1 View Post
Very nice job, Like how you left the bottom rails removable, Makes it easier to drop the motor...
Thanks. I built it to be easy to disassemble since i didnt know what changes I might ned to make afterwards

-07 700 SE 84hp and 62ftlb tq
Motor-- +5 Hotrod & TRF Big Valve 105.5 piston 14:1 = 777cc, Slingshot and Tusk clutch,
Bo's Megalodon port and Webb 4, WK 54mm TB
DMC Force 4s, PC III and Programmable Dynatek Ignition w/DL curves
Chassis-- Wicked +2 A-arms, YFZ front shocks,+3 stock swinger, Entire frame, suspension and all engine covers PC'd flat black and Invision Artworks Graphics, Dr D reverse, +1 stock bars, ASV shorties, Blingstar Victory bumper and grab bar, Tusk Nerfs
mustangracer42 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
R1 motor here i come. thanks to everyone that has or will be purchasing my stuff fineguy76 Raptor 700 Discussion 0 02-01-2008 07:25 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome