Powercommander V problems - Yamaha Raptor Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 24 (permalink) Old 03-23-2014, 05:46 PM Thread Starter
Junior Member
 
Join Date: Mar 2014
Posts: 7
Powercommander V problems

I recently bought full FMF exhaust and pcv and took off air box lid. Installed everything and now my 2008 700 raptor wont even start but if i take to pcv out its starts and runs fine. I have an error code 2303 vr module unsynced. has anyone herd of this i cant figure it out ive spent hours on the laptop trying different maps and updates nothing is working please help if anyone knows what to do or have had this problem
MylesFT332 is offline  
Sponsored Links
Advertisement
 
post #2 of 24 (permalink) Old 03-23-2014, 05:49 PM
GARAGE CULTURE

 
Pacific Barbarian's Avatar
 
Join Date: Jul 2009
Location: Kalahari Desert, South Africa
Posts: 3,723
There are two of the connectors that are exactly the same. You might have them switched around. Think the one goes on your tps. Worth a try.

Sent from my GT-P7500 using Tapatalk 2

2009 Raptor 700.
Powercommander 5 with DL700 Timing Curves, FCI with Box, HD5050, +5 Hotrods, Ported Head +2 +1 by Freez, CP 11:1, +3 Throttle Body, DMC Force 4, Lonestar Swingarm, Houser MGC LT +2.25, Custom Axis LT Triple Spring Triple Adjust with Plush Ride Upgrade Front, Custom Axis Double Spring Triple Adjust with Plush Ride Upgrade Rear, Hipertech 3, Kenda Bearclaw, Fasst Flexx, Precision Pro Steering Damper, Lonestar Axle.
Pacific Barbarian is offline  
post #3 of 24 (permalink) Old 03-23-2014, 06:02 PM Thread Starter
Junior Member
 
Join Date: Mar 2014
Posts: 7
ya tps should be on the right side in throttle body i checked that pretty sure i have the right plug thanks for the reply i will check again
MylesFT332 is offline  
 
post #4 of 24 (permalink) Old 03-23-2014, 06:31 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,509
Garage
Glad to see you here Myles, with the combined thoughts on this site, we should have you going in no time.

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
post #5 of 24 (permalink) Old 03-23-2014, 06:57 PM Thread Starter
Junior Member
 
Join Date: Mar 2014
Posts: 7
i sure hope so thanks alot for your time its much appreciated looking forward to what everyone has to say
MylesFT332 is offline  
post #6 of 24 (permalink) Old 03-23-2014, 07:04 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,509
Garage
Power commander themselves have a pretty good customer service as well. It wouldn't hurt to try giving them a call also

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
post #7 of 24 (permalink) Old 03-23-2014, 07:56 PM
www.gtpoffroad.com
 
Rap_Rider's Avatar
 
Join Date: Nov 2011
Location: Las Vegas
Posts: 2,576
seems easy but make sure the ground is good on the PCV.

Does the PCV give an error or is it the bike??

08 Raptor 700r - March 2013 ROTM

DMC Force 4 Duals - FCI Intake - PC5/Autotune - Stage 3 Hotcam - 12:1 CP Piston - +3 Cuervo TB - Ported head - Kibblewhite springs

Elka Stage 4 - Houser +2.25" MX LT MGC A-Arms - Lone Star Axle (+6)

Pro Armor Skid Plate - Pro Armor Nerf Bars

GTP Beadlock Wheels - Skat~Trak 9 paddle

ProTaper Contour Bars - Trail Tech Bar clamps - ODI grips - Fastway Steering stabilizer - Vapor

My Videos: http://www.youtube.com/user/DJraprider?feature=guide
Rap_Rider is offline  
post #8 of 24 (permalink) Old 03-23-2014, 09:30 PM Thread Starter
Junior Member
 
Join Date: Mar 2014
Posts: 7
just the pcv giving an error 2303 vr module unsynced no codes in the quad
MylesFT332 is offline  
post #9 of 24 (permalink) Old 03-24-2014, 12:11 AM
www.gtpoffroad.com
 
Rap_Rider's Avatar
 
Join Date: Nov 2011
Location: Las Vegas
Posts: 2,576
I think Dynojet is your best bet on that. They are pretty helpful. I haven't seen that error before.

08 Raptor 700r - March 2013 ROTM

DMC Force 4 Duals - FCI Intake - PC5/Autotune - Stage 3 Hotcam - 12:1 CP Piston - +3 Cuervo TB - Ported head - Kibblewhite springs

Elka Stage 4 - Houser +2.25" MX LT MGC A-Arms - Lone Star Axle (+6)

Pro Armor Skid Plate - Pro Armor Nerf Bars

GTP Beadlock Wheels - Skat~Trak 9 paddle

ProTaper Contour Bars - Trail Tech Bar clamps - ODI grips - Fastway Steering stabilizer - Vapor

My Videos: http://www.youtube.com/user/DJraprider?feature=guide
Rap_Rider is offline  
post #10 of 24 (permalink) Old 03-25-2014, 12:44 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,509
Garage
Ever contact Powercommander themselves on this Myles?

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
New Powercommander Need opinion! rockinfigs Raptor 700 Modifications 5 01-07-2007 03:03 PM
Powercommander question? rockinfigs Raptor 700 Modifications 1 01-03-2007 12:26 PM
Exhaust, Intake and Powercommander hoss314 Raptor 700 Modifications 3 12-28-2006 09:23 PM
PowerCommander? ATC-Crazy Raptor 700 Modifications 12 10-20-2006 09:34 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome