PC5 new look; Factory maps - Yamaha Raptor Forum
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 08-28-2019, 08:12 AM Thread Starter
drwinlied's Avatar
Join Date: May 2018
Location: SE WI
Posts: 46
PC5 new look; Factory maps


I just wanted to give any new purchasers out there a heads up that DynoJet has changed the look of the PC5. At least for 2015+, it no longer looks like it does in EVERY image you find online (grey/red) it's just a basic black with "DYNOJET" in stencil font, with "JET" in red. I thought I got taken on ebay but a reputable tuner said they now look like this. So don't panic if it looks straight from Hong Kong.

Next up is just some findings that seem to go against the common language on the forums, regarding the DynoJet maps they have available on their website. I've been lead to believe that running even the most minor of changes will create a lean condition (*too lean; the severity of which relative to how "minor" your change was). However, the DynoJet map for a completely stock bike goes, what I would say, significantly lean for a decent portion of the RPM band (into the -20+) and through most of the throttle position range.

Their map for just an Intake/no lid (GYTR) fattens things up in places but there are still some pretty lean areas in there too (-20+).

Has my entire raptor life been a lie?? haha. But really though, it does seem pretty contradictory to what knowledge I thought I gleaned from this site. It does, however, make sense in regards to almost every other tuning application I've had experience with: things are fat from the factory, first step is to lean them out; make moar power...granted that's focused in auto's.

Curious as to your thoughts on this.
drwinlied is offline  
Sponsored Links
post #2 of 2 (permalink) Old 08-28-2019, 11:09 AM
I may be getting older, but I refuse to grow up!

Join Date: Jun 2012
Location: PACIFIC N.W.
Posts: 10,046
I don't remember when it changed, but from the factory, the early Raptors run lean, the newer Raptors run rich. Early Raptors had a 16 bit ECU and later has a 32 bit ECU. So, if the factory map is rich, yes, it will need some leaning out to what seams like to much.

'19 Can-Am X3, RS Turbo, 172 HP, 1300x15 STU #2 paddle, Tribute front, DynaTec controller, cat delete, GTP blow off valve, custom flame wrap, Bent Metal windshield, Blazer wiper, rear window, 48in LED light bar, 14in LED light bar, GTP LED side lights, S3 shock tower brace, aluminum rear pull plate, 5K Badlands winch, dual batteries, 5ft lighted whips, Rugged radio and intercom, interior lights, rock lights, chase lights, over $200 additional switches, YES, street legal with dirt tires.

Last edited by DEZPERADO; 08-28-2019 at 11:11 AM.
DEZPERADO is offline  

Quick Reply

Register Now

In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome