Join Date: Oct 2016
Location: Manheim PA 17545
zerk fittings are not going to keep your bolts greased. The aftermarket arms for Yamaha use a pressed in delrin short sleeve creating a void in which your need to then press in your bolt sleeve then your bolt. All the zerk will do is fill the void up with grease so unless you drill holes in the a-arm bushing sleeves your bolt wont get greased. Its a crap design. I bought LSR arms and honestly wish i let my buddy make a set the proper way. Delrin bushing and a sleeve only.
Alba arms are cheap, Most arms are cheap from what I have seen. Nicest ones i have had so far are houser arms.
2005 KFX700 good bit of mods
2001 Raptor 660R too many mods