How to: change the clutch basket. Pics - Page 3 - Yamaha Raptor Forum
 
LinkBack Thread Tools
Old 02-22-2009, 06:38 PM Thread Starter
Senior Member
 
Valiko75's Avatar
 
Join Date: Apr 2007
Location: Vancouver, WA
Posts: 474
Quote:
Originally Posted by ctracingraptor View Post
ok i removed my clutch basket, and had my machinist drill the 3 rivets out, all went smooth. but your explaination doesnt tell u what do with the other left over parts, behind each rivet there is like a 1/2inch spacer, does that go back on the new basket in the same exact spot, and once u take off the old basket behind it in the center there are two 3 inch metal rings do those go back on the new clutch basket, im going from a OEM basket to a Hinson, ill try and post some pics of the parts im talking abt when i get home, thanks!
All other stock parts goes back in, the way it came off... unless if your new basket comes with some replacement parts.
Speaking of 1/2inch spasers, sounds like those are left overs from old rivets when you drill them out... Trow them away. I ground mine and i did not have any left over "spasers".

Last edited by Valiko75; 02-22-2009 at 06:50 PM.
Valiko75 is offline  
Sponsored Links
Advertisement
 
Old 05-03-2009, 09:13 PM
I am unique

 
willykiller's Avatar
 
Join Date: Jun 2007
Location: Ottawa, Ontario
Posts: 22,612
Clutch tightening tool

I made a tool today to help with the removal of the the center nut in the clutch, I riveted a inner and out clutch plate together, I used six aluminum rivets, placed the riveted clutch plates inside the clutch, then placed my gear jammer between the engine gear and clutch gear, (a penny will do) and turned the nut tight with a torque wrench, Now I don't want anyone to run to the patent office and have this patented.


686 three plugger with HV porting, 39 FCRS, Curtis Sparks exhaust, Dyna FS CDI

Last edited by willykiller; 05-03-2009 at 09:34 PM.
willykiller is offline  
Old 03-24-2010, 10:39 AM
Junior Member
 
Join Date: Mar 2010
Location: Malaysia
Posts: 5
Quote:
Originally Posted by myraptor View Post
OK, this winter I was modifying my engine along with replacing the stock clutch basket. According to many people on this forum, if some mods have been done to the engine, replacing the stoke clutch basket is a must. So, I bought a "PE Billet" clutch basket off e-bay and started replacing it. I decided to share with you guys how I did it. I would not go into details such as "taking off clutch cover and putting it back" and so on... I will focus on the basket itself.
There is one most important and difficult thing to do: a stock basket has 3 rivets, that holds basket assembly together and new basket instruction tells you to DRILL them out . So, I thought that drilling would take long time, a lot of back pain and few drill bitts (unless you have a drill press). I came up with an idea to GRIND the rivets off and knock them out I'll try to explain rest on pictures...
Well, I hope this will help some of you guys. Its too bad that I can load only 4 pics per post
replacing the stoke clutch basket is a must... hmm that sounds i need to get new stoke clutch basket.

http://freeyamahaatvservicemanualsonline09.blogspot.com
mrRemz is offline  
 
Old 03-24-2010, 10:46 AM
Senior Member
 
Join Date: Sep 2006
Location: springfield,IL
Posts: 2,417
dont replace the clutch basket with a stock one. get a hinson or gytr or something simular, but replacing with a stock one doesnt make sence.
mike

02 raptor 660/804 hybrid
804cc. 5150 cam 14.5:1 BIG carb
custom +8 swinger +2 a arms. yfz shocks
custom big bore barkers.
just what everyone needs a 800+cc 10k+ rpm 100+ HP trail bike
im the amsoil guy
02raptor660 is offline  
Old 04-10-2010, 12:32 AM
Junior Member
 
Join Date: Apr 2010
Posts: 4
keep it up broo but i have problem the pictures doesnt show
speed4ever is offline  
Old 01-19-2011, 04:00 AM
Junior Member
 
Join Date: Jan 2011
Posts: 7
Thanks Valiko75 your information is great you are explain point with pictures. This was very important threads me because i got a lot of knowledge.
Angel Smith is offline  
Old 01-19-2011, 05:31 PM Thread Starter
Senior Member
 
Valiko75's Avatar
 
Join Date: Apr 2007
Location: Vancouver, WA
Posts: 474
Quote:
Originally Posted by Angel Smith View Post
Thanks Valiko75 your information is great you are explain point with pictures. This was very important threads me because i got a lot of knowledge.
You r welcome! You will learn a lots of good stuff here. That's why this forum is about: to learn ant to share...

05 Raptor 752
Barkers duals
+10 swing arm
Valiko75 is offline  
Old 03-28-2011, 09:41 PM
Junior Member
 
Join Date: Sep 2010
Location: Fort Dodge, Iowa
Posts: 20
Did your new basket come with bolts or did you have to get those seperitly?
Sidewayz is offline  
Old 03-29-2011, 06:21 AM
I am unique

 
willykiller's Avatar
 
Join Date: Jun 2007
Location: Ottawa, Ontario
Posts: 22,612
Quote:
Originally Posted by Sidewayz View Post
Did your new basket come with bolts or did you have to get those seperitly?
They come with the new basket......................


686 three plugger with HV porting, 39 FCRS, Curtis Sparks exhaust, Dyna FS CDI
willykiller is offline  
Old 01-04-2012, 12:27 PM
Lifetime VIP

 
JesseA420's Avatar
 
Join Date: Apr 2009
Location: Nebraska
Posts: 136
i couldnt help but notice no one mentioning replacing the inner hub, and yours from the pictures looks somewhat grooved. does it not need to be replaced even if it is grooved? no performance issues?
JesseA420 is offline  
 

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Thread Tools



Similar Threads
Thread Thread Starter Forum Replies Last Post
Something happened to clutch/clutch basket. Spider-Lōc Raptor 700 Modifications 41 01-10-2010 07:29 PM
Barnett Clutch and GYTR Clutch basket???? W69DY Raptor 700 Modifications 5 08-06-2007 02:57 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome