Raptor Forum banner

thinking of widening my 660

1K views 2 replies 3 participants last post by  QuadManiac 
#1 ·
#2 ·
If you are not a big jumper you will be fine but just note that using wheel spacers on the front will increase bump steer which negatively effects handling in my opinion.

I would widen the front properly with one of the budget friendly a-arm companies (Alba, ASR, Full Flight). Just use the $160 for that kit toward a-arms. Then later on get the hubs for the rear.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top