Now what to do - Yamaha Raptor Forum
 
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 10-03-2006, 12:11 PM Thread Starter
 
Join Date: Sep 2006
Posts: 5
Now what to do

ok, if you seen my other post you will have read that i went riding and thought i blew up my 4-wheller, well i had a chance to run a compression check on it and i have 90 psi. that seems low? and if that is the case that means i am looking to do a tear down and rebuild with possible upgrades(turbo, big bore kit). either way i am posting this to find out what i should look for when tearing it down and what to expect. Also i checked the oil and antifrezze both were at there level and looked as they should, so figured that i could rule out the head gasket being blown. never the less i will have pics and i will keep you posted. thanks
keith is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 10-06-2006, 11:12 AM
Moderator
 
Mad Dog's Avatar
 
Join Date: May 2005
Posts: 17,052
Re: Now what to do

Compression with the cam decomp mechanism in usually yields around 130psi, without it you should be in the 160 range with 182 as peak. You could have dropped a valve, had a valve seal leaking, or blowby from worn out piston rings.

Remove the side covers and the spark plug and try to turn the engine over manually, if this doesn't turn relatively easily you've got some potentially major engine troubles.

Mike

Photobucket is trash now, use something else.
Mad Dog is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
got asv levers.. now what do i do with this wire from my clutch? 04Oregon660 General 660 Discussion 5 08-04-2012 08:24 PM
What do I do now? thehorseskis1 General 660 Discussion 3 03-30-2010 08:18 PM
for speed and power ? do i do now 350shifty Raptor 660 Modifications 14 10-24-2009 11:29 AM
comedy central now hurry.. its 10:40 now.. ackmed the dead terrorist.. lmfao rap7hundred Raptor 700 Discussion 5 10-26-2007 10:55 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome