Raptor Forum banner

For sale, new and used parts

24K views 139 replies 43 participants last post by  Jay D 
#1 · (Edited)
More new and used parts for sale. Let me know what you're interested in and I'll get you a package deal with shipping. I can send pictures to a phone or email.
The more you buy, the more you save!!

$17, 700 Stator Wire heat shield, new

$??, 700 Like new coil, take off

$??, 700 Starter Motor

MOST electrical bells and whistles, (ECU $old), starters, coils, etc.

$25, Factory injector, Raptor 700, cleaned and tested. Good for up to about -75HP.

$75, 550 injector, Raptor 700, good for about 85-90HP or E85,

$180 GREAT used Transmission, no reverse shaft. Other internal parts available.

$200 GREAT used Transmission, and reverse shaft. I have other internal parts available.

700 Plastic, tank covers and undertails, some new and assorted colors

$180, Extended steering stem with Anti-Vibe clamps, 7/8 and/or 1 1/8 bars. 700 +1.5, 660 +2.0, 450 +.5, Banshee +2.5

$95, Front calipers, good pads, hoses and master cylinder w/lever, Raptor 700, or upgrade for 660. (Complete front brake system).

$55, Front calipers, lots of brake pads left. Raptor 660, may need rebuild kit.

$40, Front winch mount, Raptor 700

Raptor700SE Decal Set, Red, White and Blue, new

$14, 14 tooth front sprocket, Raptor 700, NEW

Tie rods; stock, and extended, and HD tie rods and HD tie rod ends (HD tie rod ends require spindle drilling). Raptor 660, 700

$35Pr - $45Pr, Rear wheel hubs, 4/115, fits ALL Yamaha sport quads.

$40Pr, Front wheel hubs with rotors, 5/156, YFZ450, Raptor 660, 700, and Banshee

2" front wheel spacers, YFZ, 660, 700, Banshee, more.

$20Pr, Front rotors, YFZ450, Raptor 660, 700, Banshee

$40, Raptor 700 oil tank and hoses

$45, Raptor 700 Gas tank, nice

$14 each, 4, In-line billet, water coolers, universal

THOR, Phase, Blue Riding pants, padded, Size 40, but fit my 36-38 waist well.

Bilt Riding boots, size 12, (I wear 11, so room for sox) blue & black.

Side cases, stators, one ways, clutch assemblies and individual parts.


Need more, just ask

UPDATED LIST, 10% Black Friday discount thru the end of the month.
 
See less See more
#3 · (Edited)
Yes, I am. As much as I love my Raptors I'm at a point that "with age comes a cage".

I just updated the list since I have 3 USPS large Flat Rate boxes filled with parts to ship now. Lots of good parts left. See my other thread for more parts. Both my 700's, one is actually a built 727, will be for sale come summer time.
 
#5 ·
Thanks, but you new guys are smart and don't need me anymore, lol. But, I'll still be around to keep you kids in line. Wait, that's the same I had to do with the kids in my shop. Yeah, they were all 30's and 40's but I still needed to check, haha!
 
#7 ·
PM sent.
 
#9 ·
Got 3 more boxes full of Raptor goodies today! DEZPERADO has always came through well above expectations. And like all the other times I've bought parts from him, he over delivers and for way more than reasonable prices. If anyone is looking for good used and new parts, I highly recommend checking with Dez first. This is one good dude and he stands behind his parts! Thanks again Dez!
 
  • Like
Reactions: DEZPERADO
#10 ·
bump, updated
 
#12 ·
I like to think of DEZPERADO as the raptor forum warehouse supervisor. Lol. Tell him what you need and it will be on your doorstep in a few days! [emoji41]

I recieved my new +3 throttle body from dez today and it is in like new condition. He included the injector, TPS, fuel rail, pressure sensor, and boot that appears to be port matched! He also threw in a new throttle cable that wasnt even part of the deal! Just want to say "THANK YOU DEZPERADO!" You went above and beyond, as usual.

Heres a couple pics for you raptor junkies


Sent from my SM-G920V using Tapatalk
 
#13 ·
You're welcome, I'm glad you like it. Enjoy!
 
  • Like
Reactions: 4stroker4life
#16 ·
Blue, black and silver/gray. PM sent. LMK.
 
#15 ·
More new and used parts for sale. Let me know what you're interested in and I'll get you a package deal with shipping. I can send pictures to a phone or email.
The more you buy, the more you save!!

$10 each, All Balls wheel bearing kits, #22-51044, fits 125/250/350/450/660/700

$12, 700 All Balls water pump seal kit, 1622090003

$15, 700 All Balls Counter Shaft Seal kit

$60, 700 Pivot Works A-Arm pivot needle bearing kit, #PWAAK-Y02-000L. Banshee, Blaster, Warrior, YFZ450, Raptor 250/350/660/700

$25, 4 tie rod ends, 2 left, 2 right. Fit most Yamahas, and Arctic Cat 150, 250, 300, 400. Kawasaki 400, Polaris 90, Suzuki 250,400, and 500.

$5ea, CR8E spark plugs

$11, Kill Switch Tether, normally closed, works in like with key switch

$15, 700, JT 13 tooth front sprocket

$17, 700 Stator Wire heat shield

$?? pr, Tusk HP *TA125R* Sintered front brake pads, both sides.

$55 both pr, 700 Yamaha 3B4-W0046-00 and -10 Sintured front brake pads, L&R both sides

$15, 700 Factory Spec FS-428 Severe Duty rear brake pads. 450 Rhino/660/700

$29, EBC FA428X carbon Graphite rear brake pads. 450 Rhino/660/700

$??, 700 Yamaha 93101-12173 Shift shaft seal

$??, 700 Yamaha 93112-31011 Upper Steering stem seal


Some lightly used parts, you may be interested in, the more you buy, the more you save....

$??, 700 Factory heel guards, take offs

$??, 700 Like new coil, take off

$??, 700 Starter Motor

$170 +$20 S&H, 700 Complete wire harness, '06-'08

MOST electrical bells and whistles, ECU, TPS, injectors, starters, coils, etc.

$200 and $300, Raptor 700, 2 Transmissions and other internal parts.

700 Plastic grills, tank covers and undertails, some new and assorted colors

I have more new and used parts you may be interested in. Parts for a complete 700 except a frame. PM me what you need, want or just have to have.
THANKS
More new and used parts for sale. Let me know what you're interested in and I'll get you a package deal with shipping. I can send pictures to a phone or email.
The more you buy, the more you save!!

$10 each, All Balls wheel bearing kits, #22-51044, fits 125/250/350/450/660/700

$12, 700 All Balls water pump seal kit, 1622090003

$15, 700 All Balls Counter Shaft Seal kit

$60, 700 Pivot Works A-Arm pivot needle bearing kit, #PWAAK-Y02-000L. Banshee, Blaster, Warrior, YFZ450, Raptor 250/350/660/700

$25, 4 tie rod ends, 2 left, 2 right. Fit most Yamahas, and Arctic Cat 150, 250, 300, 400. Kawasaki 400, Polaris 90, Suzuki 250,400, and 500.

$5ea, CR8E spark plugs

$11, Kill Switch Tether, normally closed, works in like with key switch

$15, 700, JT 13 tooth front sprocket

$17, 700 Stator Wire heat shield

$?? pr, Tusk HP *TA125R* Sintered front brake pads, both sides.

$55 both pr, 700 Yamaha 3B4-W0046-00 and -10 Sintured front brake pads, L&R both sides

$15, 700 Factory Spec FS-428 Severe Duty rear brake pads. 450 Rhino/660/700

$29, EBC FA428X carbon Graphite rear brake pads. 450 Rhino/660/700

$??, 700 Yamaha 93101-12173 Shift shaft seal

$??, 700 Yamaha 93112-31011 Upper Steering stem seal


Some lightly used parts, you may be interested in, the more you buy, the more you save....

$??, 700 Factory heel guards, take offs

$??, 700 Like new coil, take off

$??, 700 Starter Motor

$170 +$20 S&H, 700 Complete wire harness, '06-'08

MOST electrical bells and whistles, ECU, TPS, injectors, starters, coils, etc.

$200 and $300, Raptor 700, 2 Transmissions and other internal parts.

700 Plastic grills, tank covers and undertails, some new and assorted colors

I have more new and used parts you may be interested in. Parts for a complete 700 except a frame. PM me what you need, want or just have to have.
THANKS
I want the water pump seal kit, the upper steering stem seal, (is that with new plastic brackets, or just the o-rings?) an oem exhaust heat shield if you have one, and i may need one of those transmissions. I need to open up the bottom end on my bench to see for sure on that one. I also want the hdd5050 cam, hd valve springs, clearanced rocker, head studs, and steel brake lines from your other thread.

Sent from my SM-G920V using Tapatalk
 
  • Like
Reactions: Cammy
#17 ·
PM sent. LMK.
I may have some time this weekend to open up that other case and finalize my order. Hey, i was thinking, i just have a factory non-ported head. That may not pair well with that hdd5050. What does everyone think?

Sent from my SM-G920V using Tapatalk
 
  • Like
Reactions: DEZPERADO
#26 ·
List is updated, but I have lots more then what's listed. What are you looking for?
 
#28 ·
Of what you have listed I have dual exhaust. DMC Force Four for a dual port head, '06-'14. I also have a complete FCI and Pro Design intake systems. I can send pictures to your phone or email.
 
#30 ·
Sorry, no 660 plastic.

I do have;
rear hubs
front hubs
front calipers
front wheel bearings, new
tie rods
tie rod ends, new
steering stem, aftermarket

more.
 
  • Like
Reactions: Scotscockney
#33 ·
Sorry, no.
 
#34 ·
Have you got any puc style steering dampers ,ideally a Elka system 5 , precision,
Shipped to the UK
Cheers
 
#35 ·
Bump, who needs parts?
 
#38 ·
Dez i need that coil

More new and used parts for sale. Let me know what you're interested in and I'll get you a package deal with shipping. I can send pictures to a phone or email.
The more you buy, the more you save!!

$60, 700 Pivot Works A-Arm pivot needle bearing kit, #PWAAK-Y02-000L. Banshee, Blaster, Warrior, YFZ450, Raptor 250/350/660/700

$25, 4 tie rod ends, 2 left, 2 right. Fit most Yamahas including 450, 660 700, and Arctic Cat 150, 250, 300, 400. Kawasaki 400, Polaris 90, Suzuki 250,400, and 500.

$5ea, CR8E spark plugs

$17, 700 Stator Wire heat shield

$?? pr, Tusk HP *TA125R* Sintered front brake pads, both sides.

$55 both pr, 700 Yamaha 3B4-W0046-00 and -10 Sintured front brake pads, L&R both sides

$15, 700 Factory Spec FS-428 Severe Duty rear brake pads. 450 Rhino/660/700

$29, EBC FA428X carbon Graphite rear brake pads. 450 Rhino/660/700


Some lightly used parts, you may be interested in, the more you buy, the more you save....

$??, 700 Like new coil, take off

$??, 700 Starter Motor

MOST electrical bells and whistles, ECU, injectors, starters, coils, etc.

$200 GREAT Transmission except reverse is chipped, and other internal parts.

700 Plastic, tank covers and undertails, some new and assorted colors

I have more new and used parts you may be interested in. Started with enough parts for a complete 700 except a frame. PM me what you need, want or just have to have.

THANKS, a few more things.

Seat.
Extended steering stem with Anti-Vibe clamps, 7/8 or 1 1/8 bars.
Rear axle bearings and seals.
Front calipers 700
Front calipers 660
Front rotors
Rear rotor, Driven Saw Blade
HD radiator, (early) and HD fan
Front winch mount
700SE Decal Set, Red, White and Blue
14 tooth front sprocket
Tie rods, stock, extended, and HD tie rods and HD tie rod ends (require spindle drilling).

Need more, just ask.
 
#39 ·
OK, PM for my paypal.

Lots of new parts added on the first page. The more you buy, the better the deal. I can ship one thing in a box or 10 things in the same box. If you think my prices are to high, don't hesitate to make a offer.
 
#43 ·
Sorry, that was a typo. It is for a 660 Rhino.
 
#42 ·
What plug number do you use?
 
#44 ·
Flat Rate Box with bearings and seals shipped to Branson, Mi today. Tracking number sent, THANKS.

List is updated and lots of parts added.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top