The o8 version will work, it is what is on mine. Setting up the PCIII is very simple there is a post right in the header of this forum where you can get a map that is close enough depending on which intake you get, then you really should gety it on the dyno and have it tuned. mine was close but when on the dyno I was very lean on top and rich at the bottom. I mounted mine in the tool box but some mount theirs in the air box. There are lot of people here that can help......Enjoy.
Jeff
734 09 Raptor
Meglodon by Bo,KW springs Ferrea valves , Web 4 Cam, 54mm TB, 105.5mm CP cylinder, 14:1 CP, Barkers Inframe, Dynatek Coil, PC V, Dynatek Programable ignition
CCP stabilizer,+5 swinger,Boss Noss Sys, Direct Drive Lock-up, KDS Evac valve,HID Light conversion,SPAL fan
Tuned by EHS Racing 78hp 55Tq