Parts - Yamaha Raptor Forum
 2Likes
  • 1 Post By Jolley.tyler
  • 1 Post By DEZPERADO
 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 09-11-2019, 01:36 PM Thread Starter
Junior Member
 
Join Date: Sep 2019
Posts: 3
Parts

Just picked up a 2005 Raptor 350 special edition on trade, runs amazing just wasn’t taken care of very well lol, it’s missing the plastic piece on the handlebars that have the indicators for the neutral and reverse lights, does anybody know what exactly that piece is called, I can’t seem to find anything about it online. Also the exhaust was kind of hacked up and somebody definitely should have the welding privileges revoked, any tips on a halfway decent full exhaust that’s not gonna run me 300$? Any help would be greatly appreciated!
Jolley.tyler is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 09-11-2019, 09:52 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,586
Garage
Welcome to the forum, I might have that bezel piece. Will rummage through my cabinets some. Have you looked at RMATV.com for exhaust?

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
post #3 of 8 (permalink) Old 09-11-2019, 11:11 PM
I may be getting older, but I refuse to grow up!

 
Join Date: Jun 2012
Location: PACIFIC N.W.
Posts: 10,024
Garage
Quote:
Originally Posted by morphrider View Post
Welcome to the forum, I might have that bezel piece. Will rummage through my cabinets some. Have you looked at RMATV.com for exhaust?
I have some of those pieces for a Raptor 700 but I don't know if they fit the 350. What do you think Morph, are they similar?

'19 Can-Am X3, RS Turbo, 172 HP, 1300x15 STU #2 paddle, Tribute front, DynaTec controller, cat delete, GTP blow off valve, custom flame wrap, Bent Metal windshield, Blazer wiper, rear window, 48in LED light bar, 14in LED light bar, GTP LED side lights, S3 shock tower brace, aluminum rear pull plate, 5K Badlands winch, dual batteries, 5ft lighted whips, Rugged radio and intercom, interior lights, rock lights, chase lights, over $200 additional switches, YES, street legal with dirt tires.
DEZPERADO is offline  
 
post #4 of 8 (permalink) Old 09-12-2019, 05:16 PM Thread Starter
Junior Member
 
Join Date: Sep 2019
Posts: 3
Quote:
Originally Posted by morphrider View Post
Welcome to the forum, I might have that bezel piece. Will rummage through my cabinets some. Have you looked at RMATV.com for exhaust?
If you had one I’d be more than willing to travel depending on where you’re located or pay to have it shipped to me. And I haven’t yet, I found a used header for 20$ on marketplace about 2 hours from me I’m gonna go get if I can’t find something else before, at that point I guess I’ll just order a new slip on.
Jolley.tyler is offline  
post #5 of 8 (permalink) Old 09-12-2019, 08:33 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,586
Garage
Ok, I don't have dash or exhaust for you. I would jump on that header and still keep an eye out for other parts.

DEZ - I do believe the bezels are different. I think on the 350 it has those round dash lights involved. Maybe similar to a 660?

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
post #6 of 8 (permalink) Old 09-13-2019, 10:58 AM
Senior Member
 
KB Motorsports's Avatar
 
Join Date: Aug 2006
Location: Kentucky
Posts: 3,441
Send a message via AIM to KB Motorsports Send a message via MSN to KB Motorsports
Quote:
Originally Posted by Jolley.tyler View Post
Just picked up a 2005 Raptor 350 special edition on trade, runs amazing just wasnít taken care of very well lol, itís missing the plastic piece on the handlebars that have the indicators for the neutral and reverse lights, does anybody know what exactly that piece is called, I canít seem to find anything about it online. Also the exhaust was kind of hacked up and somebody definitely should have the welding privileges revoked, any tips on a halfway decent full exhaust thatís not gonna run me 300$? Any help would be greatly appreciated!
I can't recall any exhaust being less than 300 for the Raptor/Warrior setup. However, you should be able to find a few slip ons in that price range. (HMF/BigGun). I'm unsure what Yamaha called the dash on their website, but I would search Facebook marketplace and Craigslist in your local area to find a part out.
KB Motorsports is offline  
post #7 of 8 (permalink) Old 09-13-2019, 06:28 PM Thread Starter
Junior Member
 
Join Date: Sep 2019
Posts: 3
Quote:
Originally Posted by morphrider View Post
Ok, I don't have dash or exhaust for you. I would jump on that header and still keep an eye out for other parts.

DEZ - I do believe the bezels are different. I think on the 350 it has those round dash lights involved. Maybe similar to a 660?
Went to get the exhaust and ended up buying a complete frame minus the plastics for 200$. Doesn’t seem too bad at all. Got my exhaust issue solved and the other small shit. Just got to find that bezel now. And yes they did have round lights, just a reverse and neutral. Brand new to the sport quad world so I have no idea if the 660s or 700s would be the same or not
morphrider likes this.
Jolley.tyler is offline  
post #8 of 8 (permalink) Old 09-13-2019, 07:53 PM
I may be getting older, but I refuse to grow up!

 
Join Date: Jun 2012
Location: PACIFIC N.W.
Posts: 10,024
Garage
The one I have has one hole like for a light and one hole for the key switch. It has room to drill holes on each side for more lights. It clamps on the handle bars with the built-in plastic clips. If you want to try, it's yours, just pay shipping.
morphrider likes this.

'19 Can-Am X3, RS Turbo, 172 HP, 1300x15 STU #2 paddle, Tribute front, DynaTec controller, cat delete, GTP blow off valve, custom flame wrap, Bent Metal windshield, Blazer wiper, rear window, 48in LED light bar, 14in LED light bar, GTP LED side lights, S3 shock tower brace, aluminum rear pull plate, 5K Badlands winch, dual batteries, 5ft lighted whips, Rugged radio and intercom, interior lights, rock lights, chase lights, over $200 additional switches, YES, street legal with dirt tires.
DEZPERADO is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome