Raptor 80 Procom CDI Box for Raptor 50
Whats up everyone! Last year around September I started looking for a small ATV for my son, who is 5, for his big Christmas gift. A good buddy of mine had a 2008 Raptor 50 he was selling that was in amazing shape so after a little haggling I loaded it up and brought it home. Now, like all of you, I can't seem to leave anything stock haha. I started looking at things I could do to make it faster, sound better, and look better. First couple of things I did was the throttle mod, slide mod, new nozzle, bigger main and pilot jet, removed the air box and replaced it with an UNI two stage pod filter, removed the silencer from the exhaust and replaced it with a tip, and painted the wheels black. I was pretty happy at this point minus one thing....that god awful rev limiter!!! So I started doing some research on what others had done and what I ended up purchasing was the Procom CDI box for the Raptor 80 Part# PE-C-AY80-A. I ran out of time right before Christmas and wasn't able to get the CDI box installed so I'm finally getting back around to working on it.
My question is....have any of you used the 80 CDI box on the 50? If you have, do any of you have pics of what wires match up? I've read a few threads that say the 80 CDI wires are a direct match with the 50 but when I looked at it there was two wires that wont be used but out of the ones that will....there was two or three that were not a direct match so I'm just looking for some clarification before I go cutting into the harness.
Thanks in advance everyone! This forum is awesome!