LOST FLOAT BOWL Carb an pieces on 90... 2009 Help - Yamaha Raptor Forum
 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 04-06-2019, 08:28 PM Thread Starter
Junior Member
 
Join Date: Apr 2019
Posts: 2
LOST FLOAT BOWL Carb an pieces on 90... 2009 Help

Recieved a 2009 Yam. Raptor from a friend with missing pieces . Ive replaced the kick starter.. will be replacing main switch assembly[key] and ignition starter.

My problem is where to get a new better after market carb or missing pieces from the original. A rebuild kit seem to have the smaller pieces but no float bowl tank and other things that are missing from the carb. The original owner took it apart to clean an lost all of the [float bowl +float+ screw.ect] sugguestion welcome... pics soon
DJAY629 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 04-07-2019, 11:58 AM Thread Starter
Junior Member
 
Join Date: Apr 2019
Posts: 2
Here some pics if anyone knows where to start..? Everything ive found has been someone rejetting the old carb. But I dont have everything to rejet with.
Attached Thumbnails
Click image for larger version

Name:	20190407_115239_1554656270132.jpg
Views:	9
Size:	61.5 KB
ID:	132607   Click image for larger version

Name:	20190407_115201_1554656281686.jpg
Views:	7
Size:	70.1 KB
ID:	132609   Click image for larger version

Name:	20190407_115226_1554656293006.jpg
Views:	10
Size:	60.0 KB
ID:	132611   Click image for larger version

Name:	20190407_115310_1554656319506.jpg
Views:	10
Size:	66.1 KB
ID:	132613  
DJAY629 is offline  
post #3 of 3 (permalink) Old 04-07-2019, 12:58 PM
Senior Member
 
4stroker4life's Avatar
 
Join Date: Jul 2017
Location: SW Missouri USA
Posts: 1,643
Alot of that stuff can be purchased individually from a oem parts dealer like partzilla or rmatv. Or your local yamaha dealer if youd like to get ripped off, lol. Unfortunately the float bowl itself can only be purchased with the whole carb assembly. If it were me, id look for a good used oem carb on ebay

Sent from my SM-G920V using Tapatalk

07' Raptor 700- 11:1, hotcam 3, Pro design intake with K&N, +3 throttle body, Monster big bore duals, MSD with cuervo timing, JOGACA shocks, trail tech VAPOR, GYTR heel guards & bumper & nerfs, .250 aluminum skids, TM case saver, folding anodized levers and shifter, powermadd hand guards

04' raptor 660-Hot rods crank, .5mm overbore, 11:1 wiseco piston, Stage 1 hotcam, Yoshimura slip-on exhaust, K&N filter with outerwears, open lid airbox, Dynojet stage 2 jet kit
4stroker4life is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
took carb off, float valve looks ok' but float was bent, still leaking, PLEASE HELP murkr Raptor 660 Maintenance 41 07-10-2010 06:18 PM
Float bowl Screws CalledFollower Raptor 660 Modifications 31 02-01-2008 05:04 AM
Broken Float Bowl HELP??? sf23 General 660 Discussion 3 10-08-2007 10:18 PM
leaking out float bowl vents easy Raptor 660 Modifications 5 08-04-2007 03:29 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome