Little Sahara - Page 3 - Yamaha Raptor Forum
 107Likes
Reply
 
LinkBack Thread Tools Display Modes
post #21 of 79 (permalink) Old 10-27-2017, 06:38 PM Thread Starter
Senior Member
 
4stroker4life's Avatar
 
Join Date: Jul 2017
Location: SW Missouri USA
Posts: 1,671
Thanks for the advice and direction folks. I pulled the trigger on buying a light bar. I went with this ebay cheapie, hope its not too crummy! I made sure to get one that was "10D" with "cree" leds, with an ip rating of 68, which i believe is the top rating. Thank you for mentioning these, i wouldnt have known to look for those specific things.

I guess anything will be better than my oem headlights. I dont think i could see far enough to get out of 1st gear with those!!!

Waiting til the day we leave i feel like a kid at Christmas time, just counting down the days with uncontrollable anticipation


https://www.ebay.com/itm/132106434714

Sent from my SM-G920V using Tapatalk

07' Raptor 700- 11:1, hotcam 3, Pro design intake with K&N, +3 throttle body, Monster big bore duals, MSD with cuervo timing, JOGACA shocks, trail tech VAPOR, GYTR heel guards & bumper & nerfs, .250 aluminum skids, TM case saver, folding anodized levers and shifter, powermadd hand guards

04' raptor 660-Hot rods crank, .5mm overbore, 11:1 wiseco piston, Stage 1 hotcam, Yoshimura slip-on exhaust, K&N filter with outerwears, open lid airbox, Dynojet stage 2 jet kit
4stroker4life is offline  
Sponsored Links
Advertisement
 
post #22 of 79 (permalink) Old 10-27-2017, 08:39 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,595
Garage
They will be better for sure. When I brought the wife's son and his friends to the dunes, they were unimpressed with stock lights after seeing mine, lol.
4stroker4life likes this.

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
post #23 of 79 (permalink) Old 11-03-2017, 01:33 PM Thread Starter
Senior Member
 
4stroker4life's Avatar
 
Join Date: Jul 2017
Location: SW Missouri USA
Posts: 1,671
Got my toes in the sand, but not an ocean in sight....

Sent from my SM-G920V using Tapatalk
Cammy, DEZPERADO, mattzila and 1 others like this.

07' Raptor 700- 11:1, hotcam 3, Pro design intake with K&N, +3 throttle body, Monster big bore duals, MSD with cuervo timing, JOGACA shocks, trail tech VAPOR, GYTR heel guards & bumper & nerfs, .250 aluminum skids, TM case saver, folding anodized levers and shifter, powermadd hand guards

04' raptor 660-Hot rods crank, .5mm overbore, 11:1 wiseco piston, Stage 1 hotcam, Yoshimura slip-on exhaust, K&N filter with outerwears, open lid airbox, Dynojet stage 2 jet kit
4stroker4life is offline  
 
post #24 of 79 (permalink) Old 11-03-2017, 07:07 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,595
Garage
Quote:
Originally Posted by 4stroker4life View Post
Got my toes in the sand, but not an ocean in sight....

Sent from my SM-G920V using Tapatalk
You suck.......

How's the weather?

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
post #25 of 79 (permalink) Old 11-03-2017, 07:07 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,595
Garage
Few more hours to the West and we can play in the Walden sand... high elevation, 8500'
4stroker4life likes this.

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
post #26 of 79 (permalink) Old 11-03-2017, 07:55 PM
Senior Member
 
mattzila's Avatar
 
Join Date: May 2013
Location: St. Louis MO
Posts: 1,123
Whole nuther world ainít it?


Sent from my iPhone using Tapatalk
morphrider and 4stroker4life like this.

I wouldn't wanna be a member of any club that would have me.
06, 11:1, HC3, +3TB, Barkers, PCV w/DL700 timing+autotune, rigid light bar, HIDs in stock housings, 2 AUX floods, FCI w/box, Fastflexx bars, JOGACA shocks, driveline performance clutch with full fiber mod, pro armor nerfs, honda thumb throttle, sixpack rack(holds 12 if still in the box).
'74 wife, w/big 2.
mattzila is offline  
post #27 of 79 (permalink) Old 11-03-2017, 08:29 PM Thread Starter
Senior Member
 
4stroker4life's Avatar
 
Join Date: Jul 2017
Location: SW Missouri USA
Posts: 1,671
Quote:
Originally Posted by morphrider View Post
You suck.......

How's the weather?
Its usually me that is jealous of everyones cool trip! Yesterday was drizzly and cool. Today was mid 50s and beautiful! Nights are pretty chilly, i am next to a fire now...



Sent from my SM-G920V using Tapatalk
Cammy, morphrider and mattzila like this.

07' Raptor 700- 11:1, hotcam 3, Pro design intake with K&N, +3 throttle body, Monster big bore duals, MSD with cuervo timing, JOGACA shocks, trail tech VAPOR, GYTR heel guards & bumper & nerfs, .250 aluminum skids, TM case saver, folding anodized levers and shifter, powermadd hand guards

04' raptor 660-Hot rods crank, .5mm overbore, 11:1 wiseco piston, Stage 1 hotcam, Yoshimura slip-on exhaust, K&N filter with outerwears, open lid airbox, Dynojet stage 2 jet kit

Last edited by 4stroker4life; 11-03-2017 at 08:31 PM.
4stroker4life is offline  
post #28 of 79 (permalink) Old 11-03-2017, 08:32 PM Thread Starter
Senior Member
 
4stroker4life's Avatar
 
Join Date: Jul 2017
Location: SW Missouri USA
Posts: 1,671
Quote:
Originally Posted by morphrider View Post
Few more hours to the West and we can play in the Walden sand... high elevation, 8500'
After seeing what this sand dune thing is all about, i just might make it out there soon. I am having a blast here....

Sent from my SM-G920V using Tapatalk
morphrider likes this.

07' Raptor 700- 11:1, hotcam 3, Pro design intake with K&N, +3 throttle body, Monster big bore duals, MSD with cuervo timing, JOGACA shocks, trail tech VAPOR, GYTR heel guards & bumper & nerfs, .250 aluminum skids, TM case saver, folding anodized levers and shifter, powermadd hand guards

04' raptor 660-Hot rods crank, .5mm overbore, 11:1 wiseco piston, Stage 1 hotcam, Yoshimura slip-on exhaust, K&N filter with outerwears, open lid airbox, Dynojet stage 2 jet kit
4stroker4life is offline  
post #29 of 79 (permalink) Old 11-03-2017, 08:38 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,595
Garage
Quote:
Originally Posted by 4stroker4life View Post
After seeing what this sand dune thing is all about, i just might make it out there soon. I am having a blast here....

Sent from my SM-G920V using Tapatalk
Not sure exact lay out over there, seems pretty flat. But up here it's flat, sort of, until you get to the edge. The world is not flat. It drops. Fast.

Then a several point turn around, thank god for reverse, and then look up. You have no choice. Lean forward, thumb full on...go.

Might not be as long of chutes as others, but there is no run at them to get momentum. If you drop down the interesting ones that is.

Majority of you tube videos show the lame ass gathering spots. Stuff razors get up and any other units. All it takes is to wander a bit in either direction. Lack of power gets you in trouble fast.
4stroker4life likes this.

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
post #30 of 79 (permalink) Old 11-03-2017, 08:39 PM
POTW Moderator

 
Join Date: May 2012
Location: Northern Colorado
Posts: 7,595
Garage
How are this lights doing?

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
PRM Edge Baja bumper w/12" Cree spot/flood bar
PRM Desert grab bar
PRM A-Arm skids, GYTR skid, ProArmor swinger skid
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Raptor Rally '07, Little Sahara Utah pile0g00 Rider Locations / Meets 321 08-24-2007 10:19 PM
coral pink and little sahara NICK Rider Locations / Meets 11 01-25-2007 03:33 PM
Went to Little Sahara UT for New Years. sandsquid Off-Topic Media 10 01-08-2007 05:29 PM
Little Sahara, Oklahoma PaleRider Raptor 350 Discussion 1 11-17-2006 08:36 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome