700R Hot Cam stage 2 to 3 dyno comparison - Page 4 - Yamaha Raptor Forum
LinkBack Thread Tools Display Modes
post #31 of 35 (permalink) Old 06-17-2008, 11:31 AM Thread Starter
Senior Member
KBR's Avatar
Join Date: Oct 2006
Posts: 302
Originally Posted by Humboldt_G View Post
So what exhaust would YOU recommend for my bike. I am planning the exact same mods. I like the woods a lot but everyone says the duals are the shiz!
Duals are the best, but they are also the heaviest and most expensive.
So whatever you like!

Your right Kenny,
$150 for 3 hp, you got to be insane not to buy!

Oldham Machine
Packard ENT
KBR is offline  
Sponsored Links
post #32 of 35 (permalink) Old 06-23-2008, 11:04 AM
Senior Member
Join Date: Oct 2006
Posts: 105
Send a message via AIM to cobramn99
I ride some trails where you idle along in 1st, then hit a wide open logging road. I want something to haul ass down the logging roads but still be able to idle along. I have a pcIII and trinity intake now. If I drop in a stage 3 hotcam and 11:1 piston at the same time is it still gonna putter up the trail like stock? Would the stage 2 be better? I am still going to be running stock exhaust for now but will be switching over to Barkers a little later on down the road.

06 700R Raptor
GYTR Full Armor
GYTR Sport Front Bumper
Trinity Intake w/ K&N & Outerwear
J&E 11:1
Barker Duals
ITP T9 Pro Series/21&22 GNCC's
Renthal 15T

Awaiting Install
TQS 778 kit
Dynatek Programmable Ignition
Trail Tech Vapor
cobramn99 is offline  
post #33 of 35 (permalink) Old 06-23-2008, 04:10 PM
Posts: n/a
You won't lose a thing on the low end, you're gonna gain everywhere with the added compression and bigger cam.
post #34 of 35 (permalink) Old 02-28-2018, 12:07 PM
Junior Member
Join Date: Apr 2015
Posts: 6
Originally Posted by KBR View Post
This is a customers 700R we built for him as his duner.

We still have not removed the head.

The mods consist of:

Pro Design Intake

Dynatek Fuel Controller (KBR Mapping)

Dynatek Ignition (non programmable)

Ron Wood Pipe

KDS Bored Throttle Body

Hot Cam Stage 3

We had the exact same build with a stage 2 in it since last fall. We wanted to try the new stage 3 ina a direct back to back , change the cam on the dyno comparison.

We were pleasantly surprised. It basically matches the lower end performance and gains a solid 3 hp on the top end.

Once again Hot Cams does it.

Yeah there is more power to be had with the big boy Megacycle X-4 and the likes, but I bet its not much since the last comparison I did with HC2 to a Meg X-4 was pretty similar looking to this.

We will see, I have a 804 that has a stage 2 in it coming in for a refresh and we are going to try a X-4 and a stage 3 on the dyno and see the total comparison on a fully built 700R.

What year raptor is this?

Sent from my iPad using Tapatalk
Ariel235 is offline  
post #35 of 35 (permalink) Old 02-28-2018, 01:22 PM
POTW Moderator

Join Date: May 2012
Location: Northern Colorado
Posts: 7,618
Originally Posted by Ariel235 View Post
What year raptor is this?

Sent from my iPad using Tapatalk
Either an 06, 07, or 08. Original posting date is 2008.
Ariel235 likes this.

[U]2006 raptor 700

DMC Force 4's, FCI W/box, Dynatek Fusion,
CP 11:1 piston, BaMotorsports porting, HC3
RacersEdge +3TB
YFZ 450 fronts & reworked rear by JOGACA
Trailtech 1 1/8 xbar w/vapor dash & Vapor installed
ODI Rogue grips & ASV pro pack levers
Fastway steering stabilizer
68HP 49TQ

PM me if you need service manuals
morphrider is offline  

Quick Reply

Register Now

In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
hot cams stage 1 or hot cams stage 2? 660allstar Raptor 660 Modifications 22 04-23-2012 07:51 PM
Can i use my hot cam stage 2 gear on my stage 3 hot cam? SnowDuner02 Raptor 660 Modifications 6 02-29-2012 11:04 AM
Stage II Hot Cam VS. Stage III Hot Cam VelociRaptor Raptor 700 Modifications 26 08-02-2011 08:22 AM
Web cam stage 3 or hot cam stage 3 ?? wicked raptor Raptor 660 Modifications 3 06-04-2010 11:08 PM
Stage 1 Hot Cam vs. Stage 2 Hot Cam fullthrottle03 Raptor 660 Modifications 7 06-10-2008 09:54 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome