Some pics after rebuild RE Head 14:1 Web4 etc..
I always am interested to see what others have done so I figured I would post up what I have done over the last few months. I wanted to make a true stock bore duner that could hang with most bikes at the hill.
Started with a 06 700 with Big 3, HC3 and 11:1 JE piston.
New build consists of
Racers Edge CNC Head
+1 Ferra valves and Ferra HD Springs
KMS head stud Kit
Racers Edge 102mm 14:1 piston
Dynatek Programmable ignition
KDS Racing +3mm TB
+5 SLC Swingarm
Elka Elite shocks
I did the assembly outiside of having RE do the valves and springs.
I have not had it on the dyno yet but am going to take it up to Roosterbuilt to get it tuned in the next month or so.
I had it out to Sandlake for the maiden voyage last week and I was very pleased, it ran great with no problems leaks or issues.
I originally only planned on doing some minor upgrades to my original build, long story short I ended up changing quite a bit.
Racers Edge +1 CNC Head
Barkers, PC3, Dynetek
KDS +3mm TB, FCI Intake
Last edited by Pldbryan; 05-20-2009 at 01:32 AM.