15 tooth front sprocket (a must!) - Page 41 - Yamaha Raptor Forum
LinkBack Thread Tools Display Modes
post #401 of 406 (permalink) Old 10-07-2015, 10:58 PM
Join Date: Oct 2015
Posts: 54
I like me stump pulling torque. Not big on doing 75 on a quad.
netranger6 is offline  
Sponsored Links
post #402 of 406 (permalink) Old 10-08-2015, 12:03 AM
If you don't wreck, you don't ride
Cammy's Avatar
Join Date: Mar 2010
Location: Northwest Oklahoma
Posts: 4,448
Then I'd say leave it. I personally like stock gearing but am considering the 15t with my new power. 1st and 2nd are almost worthless to me. 2nd is a tad short in the trails and 3rd is to high lol so going up a tooth would be good.

Cammy is offline  
post #403 of 406 (permalink) Old 10-13-2015, 05:22 AM
Junior Member
Mike1's Avatar
Join Date: Oct 2015
Posts: 7
What about 15T front with a 43T rear or should I just go to the 16T?
Mike1 is offline  
post #404 of 406 (permalink) Old 10-14-2015, 05:54 AM
Junior Member
Mike1's Avatar
Join Date: Oct 2015
Posts: 7
Update: I have ordered and installed the 15T with my 43T rear on my 660 and a 16T would be too much imo. With the 15T I would barely leave first gear in the trails unless there was a nice straight path. As for flat out drags or race it is insane. Much improvement over my 13T. Its only one day of testing but I'm thinking I'm gonna like it since my buddies predator 500 used to beat me in a drag, pretty sure those days are over.
Mike1 is offline  
post #405 of 406 (permalink) Old 02-26-2018, 02:56 PM
Junior Member
Join Date: Feb 2018
Posts: 15
i cant see a raptor 700 doing 135mph lol 135kph no problem... i have/had a 700r 2009, full k&n air filter, msd blaster fuel/ignition controller, full big gun evo r duals, slick road tyres, 15/36 gearing and i topped out at 89.6mph on flat surface, and it was screaming pretty loud. standard they have almost 40hp, probably 45/50 once you do the "big 3". 60bhp if you go stage 2, but thats still not enough to be getting 135mph. my mates ktm 690 2017 model has about 70hp and only does 120 and thats had the race fuel controller mod airbox and full akro exhaust. so imo 135 is just not possible from a 700.
tapanhisrappy is offline  
post #406 of 406 (permalink) Old 05-05-2018, 09:24 AM
Junior Member
Join Date: May 2018
Posts: 5
Hey yall im new 2 the forum i have a question bout sprockets i have a 2018 yamaha raptor 700 i added the Barkers Big 3 dual kit 2 it its hella fast n i love it wat size front n rear sprockets should i get to have more top end but i dnt want 2 lose a lot of botton due to sum trail riding
LaronM81 is offline  

Quick Reply

Register Now

In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
12 tooth or 15 tooth? Raptor660713 General 660 Discussion 6 06-05-2013 01:27 PM
Hey guys...Just need opinions on where to purchase a 15 tooth front sprocket? Diggs59 Raptor 700 Modifications 6 05-02-2008 08:59 AM
15 Tooth front sprocket and the woods bearmde Raptor 700 Discussion 14 05-31-2007 12:14 PM
where can i get a 15 tooth front sprocket in nz? Ancient Kiwi Raptor 700 Discussion 1 05-23-2007 06:02 AM
13 Tooth And 15 Tooth Comparison While Sand Hill Shooing BadRap Raptor 700 Modifications 34 11-23-2006 09:24 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome