Parts - Yamaha Raptor Forum
 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 10-12-2008, 03:32 AM Thread Starter
Senior Member
 
Join Date: Apr 2008
Posts: 130
Parts

Wondering what piston you have that u can recommend for nitrous in a 102 mm for a 690 and also if u carry carillo rods? Could i put it on or would i need to send u my crank and is there anything else u recommend putting in to beef up my motor. Looking to run a decent amount of nitrous! Any other reccomendations. Heard a few reviews on the 4 mill cranks and some say to get it and others say it may vibrate or break!
bruces_690 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 10-17-2008, 10:03 PM Thread Starter
Senior Member
 
Join Date: Apr 2008
Posts: 130
Bump
bruces_690 is offline  
post #3 of 3 (permalink) Old 11-06-2008, 04:05 PM
Senior Member
 
Join Date: Dec 2006
Posts: 2,062
Sorry for the delay, this topic did not show in bold as the new topics do so it didn't catch my attention as being a new question.

You could go with the 12 or 12.5:1 CP, I'd get the ceramic top coat and gas ports to keep the compressin ring better seated. I would not hesitate to spray nitrous on the hotrods connecting rod, I have seen one break, seen bent ones from other failures but not a broker connecting rod. If you're planning more than a 20 wet shot I would o-ring the cylinder and switch to a solid copper head gasket.
CoalShedRacing is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Raptor Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
ltr parts vs 700 parts rappyhappy Raptor 700 Discussion 1 06-01-2007 03:25 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome