Quad i have a question for you. I have an 02 660 raptor quad. I have no green/white wire on my reverse sensor near outout sprocket. What i do have is where the green white wire along with light blue wire comes out from connecter under side covering on left hand side of guad, the green white wire is hooked directly to negative terminal and light blue wire is connected to a bolt on frame for another ground. My question is why do they have the green white wire unhooked from sensor and instead hooked to neg terminal on battery and also is the light blue wire supposed to be grounded to frame like that or is it supposed to be connected elsewhere? I unhooked the green/ white wire from negative terminal and the guad started sputtering and backfiring until i reconnected.
For the best viewing experience please update your browser to Google Chrome