Yamaha Raptor Forum - View Profile: willykiller

willykiller willykiller is offline

I am unique

  Visitor Messages

Showing Visitor Messages 1 to 10 of 96
  1. Boum686
    03-30-2018 12:34 PM - permalink
    Boum686
    hello are you still available for a 3 plug head
  2. yamaha raptor
    11-18-2017 02:57 PM - permalink
    yamaha raptor
    Hello, was wondering if i could please get the oil mod info, as well how much for a 3 plug head and what igntion coils do use with that set up? Thanks
  3. Kenneth Spalding
    06-02-2017 03:51 PM - permalink
    Kenneth Spalding
    Willy killer. I'm narrowing in on my 660 raptor problem. In my pilot jets I'm running 22.5s left and right as seated on atv. My choke adjust jet is a 95 and my left maine is a 140 the right main is a 145. Dies that seem right to you for a stock raptor 660 2003 model. My symptom is bike will idle but rpms have a hard time recovering from any throttle. It is also noggin out upon 1/8 or 1/4 throttle. Any idea what could be plaguing me. ? Any help would be much appreciated. Kenny
  4. daytonz101
    05-22-2017 11:06 AM - permalink
    daytonz101
    Hows it going Willy? Can you please tell me the bolt sizes 3/8 for the head on my bigbore 660 to use. Do the (2) under the bottom of the head need to be grade 8 also? And last thing, to you just rethread hole or heli coil hole, thanks man
  5. Boum686
    02-14-2017 05:57 PM - permalink
    Boum686
    Hi how are you . how much $ to make my head 3 pluger . and no porting . also i already have a dyna fs i can send fot the proper timing curve
    thanks .

    Ps : i live in New Brunswick you can give me the price in canadian $
  6. Jafet Espinoza
    10-29-2015 02:25 PM - permalink
    Jafet Espinoza
    Can u please explain the oil mod and what is needed to complete the job? Thanks
  7. Desmond Smith
    10-27-2015 11:21 PM - permalink
    Desmond Smith
    hey man sorry to bug you but i have a 2003 raptor 660. with a cp 686cc 11:1 piston and a stage 3 cam with springs as well. i would like to put a few more add ons like a stage 3 cdi and stage 2 jets in the stock carbs. and for exhaust i know a guy that could make me tuned headers so i can put on a duel exhaust but from there would it be better or worse for the quad if i didn't put mufflers on and just went straight on the head with 2 pipes for straight duel exhaust. if i could get your feed back and any opinions on what i could do that would be great!
  8. jessman660
    03-14-2015 08:52 PM - permalink
    jessman660
    Right.. I'm gonna run a yoshi and I think wat I'm gonna do is run with the back half of the air box lid cut off along with my uni foam filter. Where do u think I should start with my jetting? And brands..

    Thanks for the reply
  9. jessman660
    03-12-2015 01:11 AM - permalink
    jessman660
    Hey willy it is brought to my attention that u know wat the hell Ur talking about lol I'm starting to build my rappy gonna put a yoshi rs3 full on it. What size jets should I try and what brand? How do u feel about an open air box? My elevation is about 1500ft do u know where my a/f screws should b?

    Thanks buddy
  10. shuman26
    01-08-2015 08:15 PM - permalink
    shuman26
    ok when i remove the valve cover is there anything that would fall out when i remove it i mean like the rocker arms or would they stay in cover thanks again

  About Me

  • About willykiller
    Location
    Ottawa, Ontario
    Interests
    Sleds, atvs and anything with lots of power.........
    Occupation
    Making more power......
    Disable Sidebar in Forum view
    Disable
  • Signature

    686 three plugger with HV porting, 39 FCRS, Curtis Sparks exhaust, Dyna FS CDI

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 06-11-2019 11:45 AM
  • Join Date: 06-30-2007
  • Referrals: 2

  Friends

Showing Friends 1 to 10 of 58

  Mentions

No results to display...

  Quotes

03-29-2015
10:52 PM - willykiller quoted Catlyn Richey in post How to make a 660r faster.
I have a '05 660r. It already has ...
07:53 PM - willykiller quoted bottledgt in post L&A one way clutch Warranty FYI
Mmm...no. It plain as day say...
07:35 PM - willykiller quoted bottledgt in post L&A one way clutch Warranty FYI
Just a heads up if you are loo...
07:26 PM - willykiller quoted scottieducati in post Raptor 660 Not firing Up, please help?
There's no Ignition. Electric is ...
07:21 PM - willykiller quoted zhornsby22 in post 660 rear bearings keep shredding??
I just bought a used 660 from a...
12:05 PM - willykiller quoted Sasquatch1017 in post Buzzing noise from CDI box when starting
I put a new battery in and a new s...
03-24-2015
09:06 PM - willykiller quoted terrencejack in post Carb Problem or Rev Limitor
I think part of the problem with ...
06:04 PM - willykiller quoted Amamda82 in post 03 660 raptor idles fine dies when given gas
I'm new to the forum as well ...
03-22-2015
11:35 AM - willykiller quoted dkhill660 in post Spit, Spudder and flame out the Exhaust
No worries i kinda thought you...
09:40 AM - dkhill660 quoted willykiller in post Spit, Spudder and flame out the Exhaust
Sorry. I should have said green...
09:34 AM - willykiller quoted dkhill660 in post Spit, Spudder and flame out the Exhaust
Ok may seem like a stupid ques...
07:02 AM - willykiller quoted Ronthadon in post Jetting trouble
I have a 2001 660 with a full ...
07:00 AM - willykiller quoted imcrazed in post Tuning questions
Hey i was wondering how you g...
06:56 AM - willykiller quoted ls7_jones in post wont start
When i try to start my raptor ...
06:54 AM - willykiller quoted Sasquatch1017 in post Buzzing noise from CDI box when starting
I am hoping I can get some input. ...
06:51 AM - willykiller quoted dkhill660 in post Spit, Spudder and flame out the Exhaust
Took the raptor into the shop....
 
For the best viewing experience please update your browser to Google Chrome