Raptor Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
226 Posts
Discussion Starter · #1 ·
Does anyone know if Im going to have a clearance issue?
 

·
I am unique
Joined
·
22,621 Posts
Does anyone know if Im going to have a clearance issue?
If you do it will be very slight problem and you should be able to move the exhaust around slightly to clear or you could put a small dent into the pipe for clearance..............
 

·
Registered
Joined
·
226 Posts
Discussion Starter · #3 ·
Thanks willy
 

·
Premium Member
Joined
·
956 Posts
I called CT on there pipe and they told me they will not clear the FCR 39's. Not sure how much smaller the 35's are.
 

·
Registered
Joined
·
4,836 Posts
I called CT on there pipe and they told me they will not clear the FCR 39's. Not sure how much smaller the 35's are.
I dont believe they are any smaller. Just a smaller hole in the same carb body. What about running a Trinity Intake? It moves the carbs down and to the left.
 

·
Super Moderator
Joined
·
17,061 Posts
CT sells, or at least sold me, a new midpipe to clear my FCRs. I sold the pipe before I got a chance to try it out though. It worked well on the new owners bike but they were running a different carb.
 

·
Registered
Joined
·
226 Posts
Discussion Starter · #8 ·

·
Registered
Joined
·
226 Posts
Discussion Starter · #9 ·
Im getting a trinity too just didnt know if it would work. Ive been doing some reading on here and just wanted to see if i was going to have an issue. Anyone want a ct pipe? Im thinking about 400 shipped lmk.
 
1 - 10 of 10 Posts
Top