Raptor Forum banner

Status
Not open for further replies.
1 - 20 of 69 Posts

·
RaptorPilot
Joined
·
602 Posts
Discussion Starter #1
Raptor of the Month April 2011


http://www.c2powersports.com


"April ROTM"

This is the place to enter your's or nominate a friend's Raptor for Raptor of the Month! Lets see em!
April 2011 ROTM is Open to all Raptors models
As always enter or nominate on the 1st through to the 15th.
Then voting runs from the 15th until the end of the month.
Past Winners have to wait 1 year to enter again, they are

Slowpross
Texas700
Tanitianrider
Redraptor23
Powdercoater
Willykiller
qwknbad
FamilyGuy001
BlinginBanshee
Chimbazoid
Devildog0431
VagasAron21
 

·
From The Stix 2 Da Brix
Joined
·
11,616 Posts
I bet you thought I entered again lol.
 

·
Registered
Joined
·
4,986 Posts






O.k. what the hell I'm gonna throw my beast in this time! Can one of you mods put my pics in my post larger like the others I still havent figured out how to do that lol thanks :D

Mod list;
1. engine mods;
Barker duals
CP 11.1 SB
HDD5050 cam
Web valve springs
+3 TB
Amsoil intake w/mini case breather filter
powercommander 5 w/custom Lucas English tune
Dynatek ignition w/DL700 custom curves
Dynatek coil w/iridium plug and 8mm wire
Upper and lower intercoolers
Upgraded/strengthened clutch mod (Full fiber replacement)

2. Chassis mods etc.;
Trailtech vapor & dash w/custom dash mount
ODI grips
1 1/8" protapers
Garmin GPS
+1.5" custom chromoly steering stem
Pro armor bullhorn front bumper
Pro armor v-style rear grab bar
EBC brakes
ASR badass tie rods w/greaseless ends
Elka stage 3 suspension
Shock socks
GYTR skids all around
GYTR Heal gaurds
DR.D reverse lever and key relocator
T.M. Designworks case saver
T.M. designworks chain roller
T.M. designworks rear guide (On ext. swinger only)
Complete stock rearend for the trails
Maxxis razr 2's
ITP Slotted mags
SLC +4 Chrome Ladderbar swingarm for the dunes
Lonestar Adj. +1- +4 Axle
Twin row carrier
Lonestar parking barake blockoff
Braided brakeline
polished caliper bracket
RK o-ring chain ?
21-12-8 10 paddle bead to bead haulers
22-7-10 mohawks
13t,14t,15t 36t,37t,38t,39t sprockets
Fox v-3 carbon helmet
Contour 1080p helmet cam w/waterproof case

I think that's everything but I'm sure I'm forgetting something LOL
Anyway thanks for checkin out my ride
Final mods for the future are a big bore kit and ASV levers and I'm done and on to the next project:D
 

Attachments

·
734RStreetScraper
Joined
·
358 Posts
I see there are a lot of awesome bikes entered already and most of you don,t like streetmachines but what the heck, lets give it a try.

here's my addiction, the airbrushed 734 Tjobster bike.

[edit]due too strange technical problems with fotopic.net i am forced to put in my fotos in via other way.:mad: will try today.[edit]









RPM GII racing shocks
Miedl design headlights
Custom made footpegs, came of a nerfbar from extremeparts
Elka system 3 steering damper
31t sprocket back, 16t sprocket front
Switch unit
Flame embossed seat custom build-in Heating
Full Flight +3 a-arms
Ace Fabrication +6 extended swingarm
Durablue Eliminator 2+2 extended axle
Speedlinez extended brakelines
Douglas Red Label wheels 10x12 back 10x10 front
G-Force extended hubs
Afam xs-gold chain
Led turnlights
Koso RX2N multi function tacho + optionel inline watertemp sensor.
Banshed chainguide
Custom made electronic reverse drive servoswitch
Monster intake
Monster dual exhaust system
K&N filter
Outerwears Prefilter
Monster looktru camcover
Extreme Billet brake blockoff
Extreme Billet oil cover
Extreme Billet Throttle Cover
Terry Dualgasser
AXP skidplate
Frixxion wave brakedisc
Tusk handlebar
light ported/flowed head with +2 Carrea valves and KW springs
Trinity 734cc cilinder met CP Tech 10:1 105,5 Custom piston.
Powercommander3
DynatekFS Programmable ignition
Webcams Highlift camshaft HDD5050
+3 bored Throttlebody
Direct Drive polished lockout with anodized ninja face
PGS Racing +5mm steeringbar
Custom Spike nuts
ASV clutch and brake handles
Blingstar waterpomp cover
Blinstar timing plug covers
Bar-end mirrors
Cnc worked grips
ASI silicone coolant hoses
custom high gloss polished front grill
polished brakemastercilinder
licenceplate led lights
2way Alarm system with proximity sensor+viper voice warning
 

·
Going broke one quad upgrade at a time
Joined
·
272 Posts
Here's my girl, Not much done, but I've only had her 5 months.. I think I'm coming along nicely.. :) More on the way in April. The last pic is the first day I had it home, my son fell in love with it. he now has his own Power Wheels raptor, a couple more years and he's gettin the real thing!
 

Attachments

·
Registered
Joined
·
2,971 Posts
Very NICE!!! the Only thing we dont like is we CANT ride ours on the street...


have you tried flipping the upper a arms from left to right and upside down to fix the upper ball joint angle?


I see there are a lot of awesome bikes entered already and most of you don,t like streetmachines but what the heck, lets give it a try.

here's my addiction, the airbrushed 734 Tjobster bike.











RPM GII racing shocks
Miedl design headlights
Custom made footpegs, came of a nerfbar from extremeparts
Elka system 3 steering damper
31t sprocket back, 16t sprocket front
Switch unit
Flame embossed seat custom build-in Heating
Full Flight +3 a-arms
Ace Fabrication +6 extended swingarm
Durablue Eliminator 2+2 extended axle
Speedlinez extended brakelines
Douglas Red Label wheels 10x12 back 10x10 front
G-Force extended hubs
Afam xs-gold chain
Led turnlights
Koso RX2N multi function tacho + optionel inline watertemp sensor.
Banshed chainguide
Custom made electronic reverse drive servoswitch
Monster intake
Monster dual exhaust system
K&N filter
Outerwears Prefilter
Monster looktru camcover
Extreme Billet brake blockoff
Extreme Billet oil cover
Extreme Billet Throttle Cover
Terry Dualgasser
AXP skidplate
Frixxion wave brakedisc
Tusk handlebar
light ported/flowed head with +2 Carrea valves and KW springs
Trinity 734cc cilinder met CP Tech 10:1 105,5 Custom piston.
Powercommander3
DynatekFS Programmable ignition
Webcams Highlift camshaft HDD5050
+3 bored Throttlebody
Direct Drive polished lockout with anodized ninja face
PGS Racing +5mm steeringbar
Custom Spike nuts
ASV clutch and brake handles
Blingstar waterpomp cover
Blinstar timing plug covers
Bar-end mirrors
Cnc worked grips
ASI silicone coolant hoses
custom high gloss polished front grill
polished brakemastercilinder
licenceplate led lights
2way Alarm system with proximity sensor+viper voice warning
 

·
734RStreetScraper
Joined
·
358 Posts
tnx. i know what you mean, already looked at it but when i flip the arms upside down, the arms look very weird cus of the steep incline the upper arms make.:confused:
doesn,t matter because i still have a little space left on the joint and my arms don,t travel alot:p
 

·
8SEVENTY3
Joined
·
1,336 Posts
I had the same problem with my fireball lowers...I cut right along the welds where the ball joint thread in to the arms and made a new piece to put in there and coped the arms at a different angle to flatten the ball joints out and welded the new piece in there. Worked perfect.
 

·
734RStreetScraper
Joined
·
358 Posts
@high octane junkie; tnx bro ;)

@white rider, that could be an option cus i still want to powdercoat the arms because i don't like the gunmetal/hammerite look on the arms, just want it plain black, so altering the joints wouln'd be to much of a deal.
then again other a-arms would be also great tho like housers or so:p
 

·
Registered
Joined
·
87 Posts
Well what the heck. Might as well through in my in the hat. Finished it this winter.

Lots of time and money, just need plastics, but the boss says no :(

Robert

Oh if someone can make the pics big that would be awesome!
 

Attachments

·
From The Stix 2 Da Brix
Joined
·
11,616 Posts
Well what the heck. Might as well through in my in the hat. Finished it this winter.

Lots of time and money, just need plastics, but the boss says no :(

Robert

Oh if someone can make the pics big that would be awesome!
That's it I'm calling Chris telling him you stole his bike and put white plastics on it. You to have more orange than tropicana lol
 

·
From The Stix 2 Da Brix
Joined
·
11,616 Posts
I think I have a bit more Orange than him minus the plastics! :cool::D
Do you have a matching orange riding zero radious lawn mower? Well he does lmao.
 

·
734RStreetScraper
Joined
·
358 Posts
1 - 20 of 69 Posts
Status
Not open for further replies.
Top