Raptor Forum banner

1 - 15 of 15 Posts

·
RaptorPilot
Joined
·
602 Posts
Discussion Starter #1

·
Registered
Joined
·
4,986 Posts
Yeah congrats tjobbie! You deserve this one for sure.
Hey yamahama I answered your pm on my board but never heard back from ya???
 

·
734RStreetScraper
Joined
·
358 Posts
tnx guys and all the folks who voted for me, all the time and effort i put in it finally payed off:beer:
 

·
734RStreetScraper
Joined
·
358 Posts
yo tnx.!
plastics are freshly painted so that isn't so hard to let it shine like that.
it,s only hard to keep it that way ;)
 

·
Registered
Joined
·
745 Posts
That is sweeeeeet !
You just convinced me that I need to converto mine to street status.
I'm in AZ so all I need is Blinkers, Mirrors, Horn, and a license light.
A little registration fee and some liability insurance and awwayyyy I go.

You gotta tell me what you are running for tires and wheels.
Knobbies just don't cut it at 60 on the pavement.

Did you change up the gearing?
Is that full on engine conversion too?

Green with Envy over here..
 

·
734RStreetScraper
Joined
·
358 Posts
That is sweeeeeet !
You just convinced me that I need to converto mine to street status.
I'm in AZ so all I need is Blinkers, Mirrors, Horn, and a license light.
A little registration fee and some liability insurance and awwayyyy I go.

You gotta tell me what you are running for tires and wheels.
Knobbies just don't cut it at 60 on the pavement.

Did you change up the gearing?
Is that full on engine conversion too?

Green with Envy over here..
blushing overhere:p tnx mate.

the tires are Maxxis Spearz back 255/40/10 front 195/50/10
wheels are special Douglas Redlabels 10"height 12"wide
60? you mean 90/100? hihi:D
for onroad apps. best sprocket size should be 15/16t front, 36t back
if you have enough power you can go lower to 15t front, 31t back but then you have to rework your sprocket-hub
engine is also fully tuned to 74hp.

grtzz.
 

·
Registered
Joined
·
745 Posts
Did some checking today.
Seems Maxxis only sells the Spearz in the European market.
I can find it on their .de domain but not their .com
Same with search engines - no reponse in the states.
Save for the few posts on this forum about the Spearz.

Looks like I am going to have to talk one of my Euro-Buddies into to shipping me a set.
 

·
734RStreetScraper
Joined
·
358 Posts
I can try to hook you up with my local parts dealer but please keep in mind that europe is
Expensive and i really don,t know what the shipping will cost ya.
 

·
Registered
Joined
·
745 Posts
Thanks for the offer - I'll do some checking around and save my pennies.

Meanwhile, post some action pictures of that bad boy hitting the streets. :thumbsup:
 

·
734RStreetScraper
Joined
·
358 Posts
will do when done.
still busy with some final touches.;)
 

·
734RStreetScraper
Joined
·
358 Posts
no they are special made headlights with E-type approvel for european road use.
brand is called Miedl Design. but i re-designed it a bit.
normally they look like this.


i took of the plastics and replaced/reversed the bolts for the looks.
 
1 - 15 of 15 Posts
Top