Raptor Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
147 Posts
Discussion Starter · #1 ·
I am running a custom map from some one on this site with my lte's just I know it works great with his bike and others have said the same but with mine it is backfiring I have not rode it much becouse I have the paddles on but in the garage when reving it up it backfires at the bottom of the rpms what do you guys think I can richen it up a little or should I run a map from dyna jet my lap top is broken so I have to adjust with the office computer leave for glamis to soon thanks for any help
 

·
Registered
Joined
·
2,480 Posts
sanbullet said:
also the pipes leak at the mid pipe should I use some high temp silicone
Yes you should on the silicone, the exhaust leak could be causing it and is prolly most of it...A freind told me to take an old towel and tightly cover the exhuast where it comes out of the can with your hand while the machine is running...If the machine slowly dies out and stalls you have an exhaust leak.......If it dies out and stalls quickly you don't have a leak......I tried it on my zx12 and sure enough I had a mid pipe leak..
 
1 - 4 of 4 Posts
Top