Raptor Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
4,836 Posts
I cant remember. I would get some Stainless Steel allen head screws.
 

·
Master of the Electron
Joined
·
15,629 Posts
They're listed in the manual (free in the stickies at top of 660 maintenance section).
 

·
Registered
Joined
·
28 Posts
Discussion Starter · #4 ·
They're listed in the manual (free in the stickies at top of 660 maintenance section).
I went through them and was only able to come up with the part number from yamaha. I was looking to purchase the allen head ones from a hardware store.
 

·
Premium Member
Joined
·
4,191 Posts

·
Registered
Joined
·
362 Posts
M4x10mm
 

·
Premium Member
Joined
·
3,166 Posts
if I remember right there is a write up on what to get in the "clear tube method" thread
 
1 - 8 of 8 Posts
Top