Raptor Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Whats going on guys, I have a raptor 660R 2001, I believe that it is getting way to much gas and is flooding the carb to the point where it is a pain to start up. Seeing if anyone had advice on what to get for the jets and things to make it run like stock. Thanks for the advise.
 

·
Master of the Electron
Joined
·
15,685 Posts
All it needs is a good carb dismantle and THOROUGH cleaning. THe only thing that often (but not always) needs replacing are the oring under the float valve seat and the oring around the choke plunger. Pull and clean each individual fuel wetted jet until theyre spotless inside.
 

·
I am unique
Joined
·
22,621 Posts
All it needs is a good carb dismantle and THOROUGH cleaning. THe only thing that often (but not always) needs replacing are the oring under the float valve seat and the oring around the choke plunger. Pull and clean each individual fuel wetted jet until theyre spotless inside.

I agree Quadmaniac..............:)
 
1 - 4 of 4 Posts
Top