Raptor Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
405 Posts
Discussion Starter · #1 ·
when checking sag lets see if im right. First you put the bike on a stand and messure from frame to axle get that messurment then take it off the stand and get that messurement. that messure is suppose to be an inch from the other messurement, then sitting on it with standard riding position messure it again and thats suppose to be 3 to 4 inches from the messurement with the tires off the ground. now do you do the same for the front tires?
 

·
Registered
Joined
·
405 Posts
Discussion Starter · #2 ·
ok cross that out i found a website someone put on here. It said for the rear to make it where its 30% of total ride sag and for the front 20% of total ride sag. Ok however thr front shock with it being 20% of the total ride sag; it brought the shock all the way to the top and i still didnt get the full 20%. Now does that sound right?
 

·
Registered
Joined
·
405 Posts
Discussion Starter · #5 ·
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top