Raptor Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
90 Posts
Discussion Starter · #1 ·
i recently just bought a differnt raptor and i put the new one way starter clutch in and have put around 50 miles on it. and recently when i ride sometimes the clutch cable seems like it is getting tight and it doesnt disengage all the way then i loosen the cable out and it works just fine.i have done this 2 times and the person that must have owned this b4 me had adjusted it and it is almost adjusted all the way in could this just be the cable going out or would it be like my springs or what idk that much about these clutches any help would be appriciated
thanks

Cody ;)
 
1 - 1 of 1 Posts
Top