Raptor Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
138 Posts
Discussion Starter #1
im doing a new build on my youtube channel taking my turbo bike ditching the turbo and building a n/a build hoping for 80 hp on this one video part 1


 

·
I may be getting older, but I refuse to grow up!
Joined
·
10,292 Posts

·
I may be getting older, but I refuse to grow up!
Joined
·
10,292 Posts
yes performance atv is doing the the top end build for me its 14.1 comp valve job with bored tb
Why the change to N/A?

What cam are you planning. I don't suppose a turbo cam will work.

FYI, IIRC a +3TB is only good up to 77HP. A good machinist that gets the TB perfectly centered can bore to 3.5mm.
 

·
Registered
Joined
·
138 Posts
Discussion Starter #5
Why the change to N/A?

What cam are you planning. I don't suppose a turbo cam will work.

FYI, IIRC a +3TB is only good up to 77HP. A good machinist that gets the TB perfectly centered can bore to 3.5mm.


it will be a custom billit cam ill prolly land 75 hp with that setup
 
1 - 7 of 7 Posts
Top