[Guest]

Could someone post up some pics of how to install the Dobeck.

 

[VelociRaptor]

Unplug your injector(will probably have to raise the tank) and it plugs inline so what it does is intercepts the signal from the computer to the injector and changes what the injector "see's". Black wire is ground(to the - side of the battery) and the red wire is hot(to the + side of the battery). I just used the velcro piece that came with it to mount it in the filter box.

 

[pacanis]

http://www.dobeckperformance.com/TFI%20INSTRUCTIONS/TFI%206050ST/TFI%206050.pdf

:thumbsup:

 

[oli700]

Throw some Di-electric grease in the plugs for good measure

 

[W69DY]

http://www.dobeckperformance.com/TFI%20INSTRUCTIONS/TFI%206050ST/TFI%206050.pdf

:thumbsup:

Thats damn near ARMY proof there LMAO... j/k WOODY

 

[RaptorGzz]

I just instaled my dobeck lasnight damn is hard !! you gotta quit the gas tank is almost imposible doing without quitting , its just two bolts..

Go to the hmf forums or to the dobeck page to find the instructions.
Good luck ! :thumbsup:

 

[oli700]

I just instaled my dobeck lasnight damn is hard !! you gotta quit the gas tank is almost imposible doing without quitting , its just two bolts..

Go to the hmf forums or to the dobeck page to find the instructions.
Good luck ! :thumbsup:

I was surprised how easy it was…..

 

[07raptorgytr]

you all took the gas tank off?? i didnt, just slip the pig tail thru the opening and plug in . i had mine installed in 5 - 10 mins.. :thumbsup:

 

[Guest]

Man that wasnt hard at all. Now I just need some settings for my mods.