[Owenlacey28]

I'm going to be puting lsr +2 arms and don't know what suspension to run I'm between elka stage 3

Or would it be better if I just revalved stock shocks for my weight

 

[Sixpack577]

Cheaper and better to have Jocaga do all 3 stock shocks.

 

[Owenlacey28]

Cheaper and better to have Jocaga do all 3 stock shocks.

But do they preform as good and have as much travel as aftermarket

 

[Crazyraptor]

Aftermarket shocks don't have more travel than stock unless you get long travel shocks and then u would need long teavel a arms. If you staying with stock travel a arms jocaga is your best bet.

 

[Sixpack577]

But do they preform as good and have as much travel as aftermarket

Yes and yes.
You do not need long travel shocks unless it is build specific.
You would need stage5 Elka's to compare to custom sprung and valved Jocaga stockers.

 

[Owenlacey28]

Yes and yes.
You do not need long travel shocks unless it is build specific.
You would need stage5 Elka's to compare to custom sprung and valved Jocaga stockers.

Would this make it h

Yes and yes.
You do not need long travel shocks unless it is build specific.
You would need stage5 Elka's to compare to custom sprung and valved Jocaga stockers.

 

[Owenlacey28]

Yes and yes.
You do not need long travel shocks unless it is build specific.
You would need stage5 Elka's to compare to custom sprung and valved Jocaga stockers.

How much does he charge

 

[Sixpack577]

How much does he charge

Alot less than they do, and it varies depending on what you need.
You'll have to talk to him, he'll answer all your questions.

 

[t web2007]

How much does he charge

You could buy all 3 shocks used, send them to Arizona, have them all done up specifically for you with dual or even tripple rate springs cheaper than the elka stage 3 with far better performance. The oem r and se model shocks are actually very nice quality and very tune able, they’re just not setup well from Yamaha.

only reasons I can think to not use the kyb shocks off a Yamaha atv would be for a very custom setup, possibly larger shafts again for a custom setup, or if you need to cut a bunch of weight.