Raptor Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
hi new to this site
just bought an 03 660 raptor
i bought it off some kid really cheap but its missing some parts and have to go through the
whole thing.

anyway my question is the factory air box is gone
what should i put on there.
it seems the aftermarket kits bolt to the factory air box.
should i just buy 2 k&ns and attach them straight to the carbs or do something else.

thanks

Steve
 

·
Registered
Joined
·
440 Posts
do some thing else if you have the two black intake hoses off of the carbs i would put them on and then match me up two pieces of pipe that fit inside the k&n and the black hoses. you will have to rejet from stock though.
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #3 ·
if you are talking about hoses that go between the air box and carb i do not have it.
its just the carbs
 

·
Registered
Joined
·
1,726 Posts
You need them, look in the forsale section, you may find someone parting out thier quad.

When you decide on the filter setup don't forget the crank case breather.
One option
http://www.knfilters.com/vent.htm
I'm using the 62-1300, the stud in the top is handy for mounting. K&N changed thier site recently, when I bought my stuff there was a buy online option that I printed and took that to autozone and they matched the price. Autozone's list was a bit higher.
 
1 - 4 of 4 Posts
Top