I recently flipped my 03 and the end of the exhaust is smashed in. It is a powder coat blue fmf i beleive, but the lady it came from sold it for her son. I put a new set of carbs on it because i stripped alot of bolts on the old one. The new one is stock and im sure my old one was jetted. I took it apart and lost a jet. Is only one side supposed to have a jet? please give me any info, after the wreck it runs like shit
Flipped my 03 and dont know where to find a tip
1 - 2 of 2 Posts
Joined
·
17,063 Posts
Two carbs = two pilot jets, two main jets, two needles, two fuel screws.
I don't know your intake setup, but you should be around 150/155 left/right mains or higher depending on airbox and filter. OEM 22.5 pilots, oem needles on 3rd clip, and adjust your fuel screws between 1 and 3 turns out (3 is richer than 1).
I don't know your intake setup, but you should be around 150/155 left/right mains or higher depending on airbox and filter. OEM 22.5 pilots, oem needles on 3rd clip, and adjust your fuel screws between 1 and 3 turns out (3 is richer than 1).
1 - 2 of 2 Posts
Join the discussion
