Raptor Forum banner

1 - 20 of 118 Posts

·
I may be getting older, but I refuse to grow up!
Joined
·
11,165 Posts
Discussion Starter #1 (Edited)
More new and used parts for sale. Let me know what you're interested in and I'll get you a package deal with shipping. I can send pictures to a phone or email.
The more you buy, the more you save!!

$60, 700 Pivot Works A-Arm pivot needle bearing kit, #PWAAK-Y02-000L. Banshee, Blaster, Warrior, YFZ450, Raptor 250/350/660/700 SOLD

$25, 4, new tie rod ends, 2 left, 2 right. Fit most Yamahas including YFZ450, Raptor 660, 700, and Arctic Cat 150, 250, 300, 400. Kawasaki 400, Polaris 90, Suzuki 250,400, and 500. SOLLD

$17, 700 Stator Wire heat shield

$?? pr, Tusk HP TA125R Sintered front brake pads, both sides, Raptor 700 SOLD

$55 both pr, Raptor 700, Factory Yamaha 3B4-W0046-00 and -10 Sintured front brake pads, L&R both sides SOLD

$15, 700 Factory Spec FS-428 Severe Duty rear brake pads. 450 Rhino-660, 700 SOLD

$29, EBC FA428X carbon Graphite rear brake pads. 450 Rhino-660, 700 SOLD


Some lightly used parts, you may be interested in, the more you buy, the more you save....

$??, 700 Like new coil, take off

$??, 700 Starter Motor

MOST electrical bells and whistles, ECU, starters, coils, etc.

$25, Factory injector, Raptor 700, cleaned and tested. Good for up to about 65-75HP.

$75, 550 injector, Raptor 700, good for about 85-90HP or E85,

$200 GREAT Transmission except reverse is chipped, and have other internal parts.

700 Plastic, tank covers and undertails, some new and assorted colors

I have more new and used parts you may be interested in. Started with enough parts for a complete 700 except a frame. PM me what you need, want or just have to have.


THANKS, a few more things.

$95, Seat, excellent condition, no rips or cracks, Raptor 700. SOLD

$180, Extended steering stem with Anti-Vibe clamps, 7/8 and/or 1 1/8 bars. 700 +1.5, 660 +2.0, 450 +.5, Banshee +2.5

Rear axle bearings and seals, Raptor 700. SOLD

$95, Front calipers, good pads, hoses and master cylinder w/lever, Raptor 700, or upgrade for 660. (Complete front brake system).

$55, Front calipers, lots of brake pads left. Raptor 660, may need rebuild kit.

$20, Front rotors, Raptor 700 and 660

$40, Front winch mount, Raptor 700

Raptor700SE Decal Set, Red, White and Blue

$14, 14 tooth front sprocket, Raptor 700

Tie rods; stock, and extended, and HD tie rods and HD tie rod ends (HD tie rod ends require spindle drilling). Raptor 660, 700

$35Pr - $45Pr, Rear wheel hubs, 4/115, fits ALL Yamaha sport quads.

$40Pr, Front wheel hubs with rotors, 5/156, YFZ450, Raptor 660, 700, and Banshee

$20Pr, Front rotors, YFZ450, Raptor 660, 700, Banshee

$40, Raptor 700 oil tank and hoses

$45, Raptor 700 Gas tank, nice

$14 each, 4, In-line billet, water coolers, universal

THOR, Phase, Blue Riding pants, padded, Size 40, but fit my 36-38 waist well.

Bilt Riding boots, size 12, blue & black.

Side cases, stators, one ways, clutch assemblies and individual parts.


Need more, just ask.
 

·
I may be getting older, but I refuse to grow up!
Joined
·
11,165 Posts
Discussion Starter #3 (Edited)
Looks like you're having a clean out Dez..
Yes, I am. As much as I love my Raptors I'm at a point that "with age comes a cage".

I just updated the list since I have 3 USPS large Flat Rate boxes filled with parts to ship now. Lots of good parts left. See my other thread for more parts. Both my 700's, one is actually a built 727, will be for sale come summer time.
 

·
Registered
Joined
·
2,043 Posts
Yes, I am. As much as I love my Raptors I'm at a point that "with age comes a cage".

I just updated the list since I have 3 USPS large Flat Rate boxes filled with parts to ship now. Lots of good parts left. See my other thread for more parts. Both 700, one is actually a built 727, will be for sale come summer time.
this makes me sad. I hope you will still stick around the forum....

Sent from my SM-G920V using Tapatalk
 

·
I may be getting older, but I refuse to grow up!
Joined
·
11,165 Posts
Discussion Starter #5
Thanks, but you new guys are smart and don't need me anymore, lol. But, I'll still be around to keep you kids in line. Wait, that's the same I had to do with the kids in my shop. Yeah, they were all 30's and 40's but I still needed to check, haha!
 

·
I may be getting older, but I refuse to grow up!
Joined
·
11,165 Posts
Discussion Starter #7
I'll take a set of wheel bearings, front and rear brake pads, couple spark plugs, and the reverse relocate lever.
PM sent.
 

·
Super Moderator
Joined
·
2,702 Posts
Yes, I am. As much as I love my Raptors I'm at a point that "with age comes a cage".

I just updated the list since I have 3 USPS large Flat Rate boxes filled with parts to ship now. Lots of good parts left. See my other thread for more parts. Both my 700's, one is actually a built 727, will be for sale come summer time.
LOL, I did the same thing, my buddies much younger than I said, WTF, now you're showing your age. I had to remind them I was getting older, and it takes longer for me to heal now.

Bye Bye Rappy and hello Side x Side.. :crying
 

·
Registered
Joined
·
427 Posts
Got 3 more boxes full of Raptor goodies today! DEZPERADO has always came through well above expectations. And like all the other times I've bought parts from him, he over delivers and for way more than reasonable prices. If anyone is looking for good used and new parts, I highly recommend checking with Dez first. This is one good dude and he stands behind his parts! Thanks again Dez!
 
  • Like
Reactions: DEZPERADO

·
I may be getting older, but I refuse to grow up!
Joined
·
11,165 Posts
Discussion Starter #10
bump, updated
 

·
Registered
Joined
·
10 Posts
Hi im new to rhe forum i have a 2005 raptor 350 rt i just replaced the original crank with a 379cc +4 stroker crank now my original piston is too long do u know wat type of piston im supposed to get or the correct length to match the crank?
 

·
Registered
Joined
·
2,043 Posts
I like to think of DEZPERADO as the raptor forum warehouse supervisor. Lol. Tell him what you need and it will be on your doorstep in a few days!

I recieved my new +3 throttle body from dez today and it is in like new condition. He included the injector, TPS, fuel rail, pressure sensor, and boot that appears to be port matched! He also threw in a new throttle cable that wasnt even part of the deal! Just want to say "THANK YOU DEZPERADO!" You went above and beyond, as usual.

Heres a couple pics for you raptor junkies


Sent from my SM-G920V using Tapatalk
 

·
I may be getting older, but I refuse to grow up!
Joined
·
11,165 Posts
Discussion Starter #13
You're welcome, I'm glad you like it. Enjoy!
 
  • Like
Reactions: 4stroker4life

·
Super Moderator
Joined
·
8,067 Posts
What color plastic grill, tank, undercover do you have?
 

·
Registered
Joined
·
2,043 Posts
More new and used parts for sale. Let me know what you're interested in and I'll get you a package deal with shipping. I can send pictures to a phone or email.
The more you buy, the more you save!!

$10 each, All Balls wheel bearing kits, #22-51044, fits 125/250/350/450/660/700

$12, 700 All Balls water pump seal kit, 1622090003

$15, 700 All Balls Counter Shaft Seal kit

$60, 700 Pivot Works A-Arm pivot needle bearing kit, #PWAAK-Y02-000L. Banshee, Blaster, Warrior, YFZ450, Raptor 250/350/660/700

$25, 4 tie rod ends, 2 left, 2 right. Fit most Yamahas, and Arctic Cat 150, 250, 300, 400. Kawasaki 400, Polaris 90, Suzuki 250,400, and 500.

$5ea, CR8E spark plugs

$11, Kill Switch Tether, normally closed, works in like with key switch

$15, 700, JT 13 tooth front sprocket

$17, 700 Stator Wire heat shield

$?? pr, Tusk HP *TA125R* Sintered front brake pads, both sides.

$55 both pr, 700 Yamaha 3B4-W0046-00 and -10 Sintured front brake pads, L&R both sides

$15, 700 Factory Spec FS-428 Severe Duty rear brake pads. 450 Rhino/660/700

$29, EBC FA428X carbon Graphite rear brake pads. 450 Rhino/660/700

$??, 700 Yamaha 93101-12173 Shift shaft seal

$??, 700 Yamaha 93112-31011 Upper Steering stem seal


Some lightly used parts, you may be interested in, the more you buy, the more you save....

$??, 700 Factory heel guards, take offs

$??, 700 Like new coil, take off

$??, 700 Starter Motor

$170 +$20 S&H, 700 Complete wire harness, '06-'08

MOST electrical bells and whistles, ECU, TPS, injectors, starters, coils, etc.

$200 and $300, Raptor 700, 2 Transmissions and other internal parts.

700 Plastic grills, tank covers and undertails, some new and assorted colors

I have more new and used parts you may be interested in. Parts for a complete 700 except a frame. PM me what you need, want or just have to have.
THANKS
More new and used parts for sale. Let me know what you're interested in and I'll get you a package deal with shipping. I can send pictures to a phone or email.
The more you buy, the more you save!!

$10 each, All Balls wheel bearing kits, #22-51044, fits 125/250/350/450/660/700

$12, 700 All Balls water pump seal kit, 1622090003

$15, 700 All Balls Counter Shaft Seal kit

$60, 700 Pivot Works A-Arm pivot needle bearing kit, #PWAAK-Y02-000L. Banshee, Blaster, Warrior, YFZ450, Raptor 250/350/660/700

$25, 4 tie rod ends, 2 left, 2 right. Fit most Yamahas, and Arctic Cat 150, 250, 300, 400. Kawasaki 400, Polaris 90, Suzuki 250,400, and 500.

$5ea, CR8E spark plugs

$11, Kill Switch Tether, normally closed, works in like with key switch

$15, 700, JT 13 tooth front sprocket

$17, 700 Stator Wire heat shield

$?? pr, Tusk HP *TA125R* Sintered front brake pads, both sides.

$55 both pr, 700 Yamaha 3B4-W0046-00 and -10 Sintured front brake pads, L&R both sides

$15, 700 Factory Spec FS-428 Severe Duty rear brake pads. 450 Rhino/660/700

$29, EBC FA428X carbon Graphite rear brake pads. 450 Rhino/660/700

$??, 700 Yamaha 93101-12173 Shift shaft seal

$??, 700 Yamaha 93112-31011 Upper Steering stem seal


Some lightly used parts, you may be interested in, the more you buy, the more you save....

$??, 700 Factory heel guards, take offs

$??, 700 Like new coil, take off

$??, 700 Starter Motor

$170 +$20 S&H, 700 Complete wire harness, '06-'08

MOST electrical bells and whistles, ECU, TPS, injectors, starters, coils, etc.

$200 and $300, Raptor 700, 2 Transmissions and other internal parts.

700 Plastic grills, tank covers and undertails, some new and assorted colors

I have more new and used parts you may be interested in. Parts for a complete 700 except a frame. PM me what you need, want or just have to have.
THANKS
I want the water pump seal kit, the upper steering stem seal, (is that with new plastic brackets, or just the o-rings?) an oem exhaust heat shield if you have one, and i may need one of those transmissions. I need to open up the bottom end on my bench to see for sure on that one. I also want the hdd5050 cam, hd valve springs, clearanced rocker, head studs, and steel brake lines from your other thread.

Sent from my SM-G920V using Tapatalk
 
  • Like
Reactions: Cammy

·
I may be getting older, but I refuse to grow up!
Joined
·
11,165 Posts
Discussion Starter #16

·
Registered
Joined
·
2,043 Posts
I want the water pump seal kit, the upper steering stem seal, (is that with new plastic brackets, or just the o-rings?) an oem exhaust heat shield if you have one, and i may need one of those transmissions. I need to open up the bottom end on my bench to see for sure on that one. I also want the hdd5050 cam, hd valve springs, clearanced rocker, head studs, and steel brake lines from your other thread.

Sent from my SM-G920V using Tapatalk
PM sent. LMK.
I may have some time this weekend to open up that other case and finalize my order. Hey, i was thinking, i just have a factory non-ported head. That may not pair well with that hdd5050. What does everyone think?

Sent from my SM-G920V using Tapatalk
 
  • Like
Reactions: DEZPERADO

·
I may be getting older, but I refuse to grow up!
Joined
·
11,165 Posts
Discussion Starter #18 (Edited)
I may have some time this weekend to open up that other case and finalize my order. Hey, i was thinking, i just have a factory non-ported head. That may not pair well with that hdd5050. What does everyone think?

Sent from my SM-G920V using Tapatalk
A ported head will always have a advantage over non ported head, there's a lot of potential in a ported head.

A performance cam, Stage #3, Web or 5050 cams work best with around 11:1 compression or more. It is my understanding the #3 and Web work in the higher rpm range, where as the HDD has great bottom end with higher over rev. I ran it in my 70HP sand quad and was amazed at the performance and pulling power. However, I have no experience with the other cams. With stock porting, I think any cam would be a improvement over stock. The Stage 3 doesn't require HD springs or rocker clearance.

I'd like to hear from T-Web on this.
 

·
Registered
Joined
·
77 Posts
Whatchya gotta have for a black tank cover?
 

·
Registered
Joined
·
29 Posts
Looking for black front grill and tank cover.

Also, looking for the following still: radiator, clutch cable, parking brake cable, gytr or newer SE heel guards.

Thanks!
 
1 - 20 of 118 Posts
Top