Raptor Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
210 Posts
There is a post around here with that same issue. You can slip on a piece of hose (Hi temp. like a radiator type, but in a smaller diameter) and that should work. :thumbsup:
 

·
Premium Member
Joined
·
601 Posts
mine did not start making noises until the springs stretched. I think it is from the heat.
 

·
Premium Member
Joined
·
601 Posts
might look at a better spring. something that can withstand heat a little better.
 

·
Registered
Joined
·
579 Posts
I had the same problem. What I did to fix it was: Bend the tabs the springs attach to. It will all be good after that. 8)
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top