Raptor Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,763 Posts
Discussion Starter · #1 ·
Im new to the 700s and wondering whats the best gearing or what are some of you guys running for 300ft? On my 660s i run smaller than normal front and big on the rear but i hear the 700 guys not really doing that. Whats yals opinion?
 

·
VALVE DROPPER
Joined
·
940 Posts
I've always ended up close to stock gearing 14-38 I've got a 13-16 tooth for the front, but I always have either the 14 or 15 on... For the back I've got 36-40 and I typically have the 38 or higher on... Hope this helps...
 

·
Registered
Joined
·
1,763 Posts
Discussion Starter · #3 ·
Yeah thats what most people say. Ive always heard tho the bigger the sprockets the better. Ive got a few ideas im going to try on big sprockets but around the same ratio as stock. See if it helps on torque.
 

·
Cola Crew
Joined
·
1,368 Posts
On my Quad I run 15-36 and come out of the hole in 3rd and shift to 4th at haft track and run it out to the lights... My mph is 67-68... If I could lose a lb or 20 off my fat ass maybe I think I could hit 70mph..:) I think it's all about wheel speed, and how hard it hooks.
 
1 - 4 of 4 Posts
Top