[drewhaws]

I am adding a relay on my 07' 700 for the flickering and lights not turning on all the time but i am seeing conflicting schematics out there. I picked up a 40amp / 12vdc relay that has 4 posts. I am running both ballasts off the one relay and have read though all the posts I can find but see conflicting diagrams- the first diagram shows:

#85 - ground
#87 - power from battery
#86 - lead from switch
#30 - to lights or ballast

second one I see on some write ups is:

#85 - ground (same)
#30 - power from battery (different)
#87 - to lights or ballast (different)
#86 - lead from switch

Can some one tell me the correct connections?

 

[lbyfz450]

Should be able to figure it out easy, one is the trigger one is the high tenson. Put 12vdc through each one and find out which one makes the high current one closed