Raptor Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
555 Posts
No

A cam and piston change is typically the 2nd stage in the build process following a (3 mod) intake, exhaust and fuel controller 1st stage.
 

·
Registered
Joined
·
542 Posts
like sprinterX said...... you should do intake, exhaust, and EFI first. THEN do a cam and piston. You would just be choking up the motor if you didnt allow for more intake and exhaust 1st....
 
1 - 4 of 4 Posts
Top