Raptor Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
320 Posts
Discussion Starter #1
Im about to take carb off to clean and adjust if needed. The problem is that I bought a dynojet kit in black box stage 1 over 2yrs ago and my quad got stolen and im not sure if anythang has been change I know everythang has been into like the engine. How can I identifying all of the jet kit parts? Please help im very eger to take off the carb
 

·
Registered
Joined
·
240 Posts
there will be numbers written on the face of the jet istelf for dynojets. right next to the slot where the screwdriver goes. That number is the jet size.
 

·
Registered
Joined
·
22,016 Posts
Factory jetting specs are:

Mikuni 140 in the left carb
Mikuni 145 in the right carb
Pilot jets are 22.5

As Warwgn said, the main jet will have a number located on the face. The pilot jets will be the same way. If you have a Dynojet kit, the needles that came with your kit are longer than the factory needles. Dynojet look a bit different than Mikuni jets, and are measured differently. Mikuni measures the amount of fuel flow in CC's per minute.

~Brian
 
1 - 3 of 3 Posts
Top