Raptor Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
I ordered a set of ITP Holeshot H-D's on black C series wheels and installed them today. Before doing so however, I took a moment to weigh the front and back wheels and tires. This was done on a fairly new digital bathroom scale so the numbers might be off a bit but this is what I found. Weights include the tire mounted on the wheel.

Front:
ITP 22x7-10 18.2lbs
Stock 14.8lbs

Rear:
ITP 20x11-9 26lbs
Stock 19.2lbs

Hope this is helpful. I did a search and didn't find any definitive side by side comparisons so I thought I'd post this up.
 

·
Registered
Joined
·
7 Posts
Re: ITP H-D's & C-Series vs. Stock 2001 Raptor wheel/tire combo: weight comparison.

I just bought Polished C Series for my raptor and will be putting them on stock tires, I will post what I find the weight to be, I hope my wheels dont add that much unsprung weight to my bike...
 

·
Registered
Joined
·
373 Posts
Re: ITP H-D's & C-Series vs. Stock 2001 Raptor wheel/tire combo: weight comparis

post some pics i just got some t-9 pro locks black 8x8 on kenda claws 18''
and i will weigh them to see the difference.
 
1 - 3 of 3 Posts
Top