Raptor Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
My quad came with sand tires front and rear. The wheels are Douglas and have a very thick wheel center. The wheels take tapered lug nuts (like on a car).

My concern is that the OEM studs are too short. The last three threads on the nut is not engaged with the stud. In my book this is a no no.

Question is… Where do I get longer studs?

Ben
 

·
Registered
Joined
·
4,986 Posts
You can get studs at pretty much any autoparts store if you are worried. Just pull the old onesout and thread in the new ones with red loctite and the double nut trick to tq. them down.
 
1 - 2 of 2 Posts
Top