Raptor Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
Hello everyone. I have a 2016 Raptor 700. bought is used, great bike nothing looks like its been abused/wear and tear. Old owner from dealership never really did greasing, lubricating etc it is still dried up grease from dealer.

In terms of lube, greasing and these little tips and how do you guys do it and where to do what?
what I mean is, can I just go around and spray wd-40 on all the joins, bearings, shocks, and all the clutch cables and shifter cables, clutch and brakes etc. And then get a grease gun to simply put grease in the nipples?

I want my raptor looking good for years to come, and hopefully least maintenance just regular oil changes. Avoiding changing bearings and ball joints and all this extra stuff.

Thank you!
 

·
Registered
Joined
·
462 Posts
Remove/clean and grease all parts that move. Swing arm bolts/bushings are neglected by many owners and can freeze up from lack of grease and are a pain to remove.
 
1 - 2 of 2 Posts
Top