Raptor Forum banner

1 - 2 of 2 Posts

2 Posts
Discussion Starter #1
686 Big bore
Stg 2 Hot Cams HD valve springs titanium valves port & polished head
Full HMF
ProFlow Intake & open air box with outerwear cover
Stg 3 CDI box & monster coil
Cuts out when you fully rev the bike but still climbs to 9000 RPM just cuts out a couple times before it gets there.
Adjusted right carb Pilot Mix screw 5 turns out and left car Pilot Mix screw to 4 turns out just to see if I needed bigger jets. Took it to a shop and got it back the same as before and never told me the jets they put in it. Appreciate any help!
1 - 2 of 2 Posts