Raptor Forum banner

PC III...fuel maps?????????

1623 Views 13 Replies 6 Participants Last post by  sanbullet
what is a fuel map? is it like a program in the PC III ow what? and when i get my PC III do i have to program it myself or is it just "plug and play"?
1 - 14 of 14 Posts
You know what a dyno machine is to tune your bike. Well after the map is made from a dyno ... you can upload it to the PCIII EFI. If you cant get it dynoed ... find someone with a map that has the same mods as you and use their map.
Unless you ordered a PCIII with a specific map installed (program) then no, your PCIII will not come with a map loaded. You will need the 9V adapter so you can power the PCIII up and load a map that is close to your mods before you install the unit on your 700 If you have any questions on how to do this once you get your PCIII let me know and I'll try to help you out.
If you order it from Fuel Moto they will load a map for your mods for you so all you have to do is hook it up when you get it. They will also send you new maps if you change your mods. A++ to deal with :thumbsup:
ok i guess i will get it from fuel moto i'm pretty sure it's cheaper from them than it is from sweetquads anyhow. which is where i was going to get it. thanks guys.
does anyone have any pictures of there PC III mounted? i'm just curious how it mounts, is it just removing the stock unit or does it plug in after the stock unit and mount in a remote location on the quad?
I have mine where the tool pouch was. Some mount in the airbox :thumbsup:
so thats what that little plug is back there?
warren said:
so thats what that little plug is back there?
No where you hook it up is under the gas tank and to the battery but it comes with pretty long wires. :thumbsup:
ok cool....but what is that plug that is under the seat. i has like three prongs(sp) i think.
warren said:
ok cool....but what is that plug that is under the seat. i has like three prongs(sp) i think.
:unsure: Not sure but if was going to guess I d say a spot to hook a diagnostic tool maybe :unsure:
G
it says in the instructions that it comes with a stock map loaded, with no mods.LOL still waiting for my barker map from Jason :3question:
Ive got a map which is close the Tech Squad Shop sent it to me if you need it PM me its for
Trinity Adapter with K+N
Barkers exhaust
PC III
Waiting on my goods to arrive here in Australia but i can email you the map
you can also install it on your bike and use a laptop to change maps on dyno jets web site they have alot of maps
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top