Raptor Forum banner

pc3 problems

606 views 2 replies 2 participants last post by  dirtman91386 
#1 ·
raptor bogged out and died(felt/sounded like ran out of gas) it slowly lost throttle over the course of a mile or 2 untill it just died and would not restast. ive narrowed it down to the pc3, it sprays fuel when all stock connectios are made. but when the pc3 is connected no fuel. i can still pull the map off the pc3 so its not fried(can still read throttle % too). you guys have been helpfull in the past with issues, was hoping someone might have a fix other than "get a new pc3" thanks in advance.
 
#2 ·
Before you go and buy another one you might call dynojet and see if they will fix the one you have if it is under a year old there should be a warranty.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top