Popping through exhaust
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
After replacing lower a arm
Raptor 350 DiscussionHello My balljoint was get out from the lower a arm in a middle of riding so I was noticed that to replace it I need to replace the whole a arm so I just install a new oem lower a arm but something feel difference now the wheel change is angle a little bit from stright he become something like...- 3
- 78
-
400ex vs 350
Raptor 350 DiscussionAlright guys so my friend is going to buying a 400ex and well I need to beat him, so what are some mods that I can do to keep up with or beat him, so far I have a 14 sproket, and I’m going to get a fmf slip on and kn air filter, would that be enough to keep up with a 400ex- 5
- 202
-
Raptor 350 petcock or carb?
Raptor 350 DiscussionHi guys, Just wondered if any one else has had the same problem as me. I have just rebuilt a salvaged 2004 raptor 350 and it runs and rides great but if i turn the fuel off and come back to it won't run, but if I pull the fuel hose off to the carb and let a bit of fuel out it starts straight...- 1
- 94
-
Yamaha 350 raptor dies when driving and stops to idle
Raptor 350 DiscussionGood day so i bought a 350 raptor for a fair price.. It has small issues. It starts easy. When you go and drive it it dies when coming to a stop and then struggles to start as soon as it warms up a bit it dies when stopping dead and then struggles to start again. Starter also makes strange noise...- 6
- 146
-
2008 Yamaha Raptor 350 making grinding noise . . .
Raptor 350 DiscussionHello, I have encountered an engine noise issue on my raptor. It just started within the last ride I was on two weeks ago. I am an industrial mechanic by trade. . . .so I am not at a complete loss with mechanical aptitude.I just figured I would research the issue a little before tearing into...- 4
- 4K
Join now to ask and comment!