Raptor Forum banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
733 Posts
Discussion Starter · #1 · (Edited)
So Dale and I were at Auto Zone returning an alternator and then I decided to get some oil for the rappy. They had some Valvoline 10w-40 ATV 4 stroke oil for $3.99 each so I got 2 BUT when I got to the register and checked out they were buy 1 get 1 free after a "motorcycle discount". I bought those 2 for $4.28...and then bought 2 more for the same price. Dale bought 6 quarts for $12 + tax. YMMV

Just trying to help out my peeps! :thumbsup:
 

·
Registered
Joined
·
1,501 Posts
That's the stuff I run in mine. My 250 destroys that stuff. I think heat and viscosity shearing play a big part in it. It turns black real quick.
 

·
Addicted To Raptor
Joined
·
255 Posts
Hmmm... I was considering full synthetic but all I know here local is Yamalube
 

·
Cola Crew
Joined
·
1,368 Posts
I too run it in mine and I like the 20-50w. It dose turn dark but I had run my quad out of oil on a ride after 20mi the bolt fell out of the cam sprocket and killed the timming chian and valves. On the rebuild I check it all out all was good ie rist pin, clutch pack and so.. The oil was used by the motor, bad rings.. Ring gap was at .090
 
1 - 5 of 5 Posts
Top