Raptor Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi. I have a yamaha raptor 700 06 model. I was rinding the bike yesterday. It was perfect. But today i let me mate ride it an soon as he came back after an hour or so it has a problem. The problem is that now the bike doesnt move. I mean i can put the clutch in change gear but soon as i let go of the clutch the bike will not move or drive. Any help plz.
 

·
Registered
Joined
·
7,128 Posts
What is happening is the clutch is slipping. There is a steel plate in the clutch, as well as a bunch of fiber plates. Best bet would be to replace all the clutch plates. TQSATV.com is a site sponser here, try will have them.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
It might be slipping. Im not sure. All i know is that i whn i put it into gear an let go of the clutch to move off or ride it. It doesnt move or ride. I can rev it all i want. Wot move at all evn though clutch is fully released.
 
1 - 9 of 9 Posts
Top